Effect of Phase Composition of Mg-Li Alloys on Mg-Li Based Composites Reinforced with Boride

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户：ccc_tw

【摘要】

：

　　For Mg-Li based composites reinforced with boride, besides improving the distribution and quantity of boride reinforced phase in composites, strengthening m

【作者】

：

DuanHui-fen;LiuZhi-jian;YuHao-ran;HuangHai-feng;

【机构】

：

Skate Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China

【出处】

：

第二届中国国际复合材料科技大会 (CCCM-2)

【发表日期】

：

2015年期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　For Mg-Li based composites reinforced with boride, besides improving the distribution and quantity of boride reinforced phase in composites, strengthening matrix is an effective way to improve performance of composites.Based on the research on the distribution and quantity of boride reinforced phase, the composite that contains 9% lithium and is composed of (Mg-9Li-1Al-1Y)-6B4C was prepared to make the performance of composites meet industrial applications' needs.

其他文献

Modification of rare earth B4C reinforced copper-based electrical contact material: Properties and p

　　The high-performance copper-based electrical contact materials were prepared via B4C modified by rare earth salt as reinforced agent.The properties were obt

会议

Deformation coordination of 06Cr19Ni10/Q235 clad composite materials under uniaxial load at room tem

　　In the present work, 06Cr19Ni10/Q235 clad composite materials are selected as the target materials.Then the deformation behavior, the surface deformation an

会议

Hot deformation mechanism and constitutive modeling of SiCp/2009Al composites

　　The present work studied hot deformation mechanism of powder metallurgy processed 17%vol.SiCp/2009Al composite via hot compression tests.The processing map

会议

Fabrication and properties of Al-based hybrid composites reinforced with SiC micro-particles and SiC

　　Hybrid reinforced aluminum matrix composites were fabricated by powder metallurgy method, with a controllable volume fraction of micro-sized and nano-sized

会议

Thermal conductivity of SiCp/Al composite with different SiC particle size and volume fraction

　　In order to study the effects of SiCp size and volume fraction on thermal conductivity of SiCp reinforced aluminum matrix composites, SiCp/2024Al composites

会议

Influence of aging temperature on microstructure and mechanical properties of SiCp/Al-Si matrix comp

　　The mass fraction of 30% SiC particles reinforced Al-Si matrix composite was prepared by One-way press method, sintering and hot extrusion.The microstructur

会议

Microstructure and Wear of CNTs/Al composites prepared by rotational friction extrusion

　　The multi-walled carbon nanotubes (CNTs) reinforced Al matrix composites were prepared by Rotational friction extrusion (RFE), And to analyze the microstruc

会议

Effect of interfacial modification on the thermo-physical property of Diamond/Al composites fabricat

　　In this paper, the molybdenum coating was successfully deposited on the surface of diamond particles by direct current magnetron sputtering method, its surf

会议

氧化铈对颗粒增强铝复合材料组织及性能的影响

　　为了研究氧化铈(CeO2)对碳化硅颗粒增强铝基复合材料组织与性能的影响,以微米级碳化硅和Al-12Si-Cu-Mg合金粉为原料,添加CeO2,采用粉末冶金法制备碳化硅颗粒增强铝基复合

会议

氧化铈颗粒增强铝基复合材料铝复合材料组织及性能CeO2碳化硅抗拉强度致密度

Mechanical properties of the W fiber reinforced copper materials produced by combustion synthesis me

　　W fiber reinforced copper materials fabricated by combustion synthesis melt infiltration under ultra-high gravity.Two styles for W fibers were designed.One

会议

Effect of Phase Composition of Mg-Li Alloys on Mg-Li Based Composites Reinforced with Boride

其他学术论文