【摘 要】
：
In order to study the effects of SiCp size and volume fraction on thermal conductivity of SiCp reinforced aluminum matrix composites, SiCp/2024Al composites
【机 构】
：
School of Physics and Engineering,Henan University of Science and Technology,Luoyang 471023,China
【出 处】
：
第二届中国国际复合材料科技大会 (CCCM-2)
论文部分内容阅读
In order to study the effects of SiCp size and volume fraction on thermal conductivity of SiCp reinforced aluminum matrix composites, SiCp/2024Al composites was fabricated by powder metallurgy technique, The thermal conductivity of silicon-carbide-particulate-reinforced aluminum matrix composite was determined as a function of the volume fraction (30,35 and 40%)and particle size (3,8,15,25 and 40 μ m) of SiC.
其他文献
Submicrometer boron carbide particles with different volume fraction (2%~6%) reinforced Al matrix composites were prepared by multi-stage vacuum hot pressin
Manganin alloy is a kind of twin type high damping alloy.Studies have reported the manganin alloy has good damping capacity and excellent mechanical propert
The copper salts on carbon fibers(Cf) surface can be reduced to native copper in hydrogen gas atmosphere, while under the high-temperature environment.Compo
7075 based composite reinforced with carbon nanotubes was prepared by friction stir processing.The thermal expansion coefficient of CNTs/7075 composite with
Due to high boron content and low density, new B4C/Al neutron absorbing material is widely used for storage and transportation of spent fuel in place of B-c
Aluminum matrix composites reinforced by multi-walled carbon nanotubes (MWCNTs/Al) were fabricated by friction stir processing, and effect of content of MWC
The high-performance copper-based electrical contact materials were prepared via B4C modified by rare earth salt as reinforced agent.The properties were obt
In the present work, 06Cr19Ni10/Q235 clad composite materials are selected as the target materials.Then the deformation behavior, the surface deformation an
The present work studied hot deformation mechanism of powder metallurgy processed 17%vol.SiCp/2009Al composite via hot compression tests.The processing map
Hybrid reinforced aluminum matrix composites were fabricated by powder metallurgy method, with a controllable volume fraction of micro-sized and nano-sized