Fabrication and properties of Al-based hybrid composites reinforced with SiC micro-particles and SiC

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户：zoudfeng

【摘要】

：

　　Hybrid reinforced aluminum matrix composites were fabricated by powder metallurgy method, with a controllable volume fraction of micro-sized and nano-sized

【作者】

：

LIJianyun[1]XIEJingpei[2]WANGAiqin[2]

【机构】

：

School of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 47102

【出处】

：

第二届中国国际复合材料科技大会 (CCCM-2)

【发表日期】

：

2015年期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　Hybrid reinforced aluminum matrix composites were fabricated by powder metallurgy method, with a controllable volume fraction of micro-sized and nano-sized SiC particles.The microstructures of the composites were analyzed by SEM and TEM, and the tensile properties were examined.

其他文献

Preparation technology and properties of Al2O3/Fe matrix composite

　　Metal matrix composite is a impotant new engineering materials due to posing the characterization ceramics and the predomination of metals.Al2O3/Fe matrix c

会议

Preparation and wear behaviour of submicrometer B4Cp/2009Al composite

　　Submicrometer boron carbide particles with different volume fraction (2%~6%) reinforced Al matrix composites were prepared by multi-stage vacuum hot pressin

会议

Influence of Sintering Temperature on Properties of M2052 Alloy Prepared by Powder Metallurgy

　　Manganin alloy is a kind of twin type high damping alloy.Studies have reported the manganin alloy has good damping capacity and excellent mechanical propert

会议

Study on in-situ metallization of carbon fiber surface

　　The copper salts on carbon fibers(Cf) surface can be reduced to native copper in hydrogen gas atmosphere, while under the high-temperature environment.Compo

会议

Thermal Expansion Characteristic of CNTs/7075 Composites Prepared by Friction Stir Processing

　　7075 based composite reinforced with carbon nanotubes was prepared by friction stir processing.The thermal expansion coefficient of CNTs/7075 composite with

会议

Fabrication, welding and service evaluation of B4C/Al neutron absorbing material

　　Due to high boron content and low density, new B4C/Al neutron absorbing material is widely used for storage and transportation of spent fuel in place of B-c

会议

Effect of the content of carbon nanotubes on the mechanical properties of Aluminum Matrix Composites

　　Aluminum matrix composites reinforced by multi-walled carbon nanotubes (MWCNTs/Al) were fabricated by friction stir processing, and effect of content of MWC

会议

Modification of rare earth B4C reinforced copper-based electrical contact material: Properties and p

　　The high-performance copper-based electrical contact materials were prepared via B4C modified by rare earth salt as reinforced agent.The properties were obt

会议

Deformation coordination of 06Cr19Ni10/Q235 clad composite materials under uniaxial load at room tem

　　In the present work, 06Cr19Ni10/Q235 clad composite materials are selected as the target materials.Then the deformation behavior, the surface deformation an

会议

Hot deformation mechanism and constitutive modeling of SiCp/2009Al composites

　　The present work studied hot deformation mechanism of powder metallurgy processed 17%vol.SiCp/2009Al composite via hot compression tests.The processing map

会议

Fabrication and properties of Al-based hybrid composites reinforced with SiC micro-particles and SiC

其他学术论文