【摘 要】
：
Rice husk ash/natural rubber composites were fabricated by modifying rice husk ash with the rare earth coupling agent DN-8102. The structure of the rice husk ash and the morphological dispersion of the rice husk ash in a rubber matrix were charactered by
【机 构】
：
Key Laboratory of Tropical Crop Product Processing, Ministry of Agriculture and Rural Affairs of the
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
Rice husk ash/natural rubber composites were fabricated by modifying rice husk ash with the rare earth coupling agent DN-8102. The structure of the rice husk ash and the morphological dispersion of the rice husk ash in a rubber matrix were charactered by scanning and transmission electron microscopy, respectively.The mechanical properties of the composites were experimentally studied. The surface energy and the interaction between rice husk ash particles can be reduced by surface modification of rice husk ash with a rare earth coupling agent, which reduces the agglomeration of rice husk ash in both liquid and rubber matrices and enhances the interactions between rice husk ash and the rubber phase, and thus results in improved me-chanical properties for the resulting rice husk ash/natural rubber composite. The modulus of the composites will increase as the loading level of modified rice husk ash increases. A maximum tensile strength of 25.96 MPa for the composites can be obtained when the modified rice husk ash loading level is 4%.
其他文献
To evaluate the property and degradation characteristics of concrete prepared with aggregate contained montmorillonite,concretes were prepared with aggregates contained montmorillonite,and then concrete slump loss,compressive strength,electric flux,the re
2198 and 5A90 Al-Li alloys were anodized with a constant DC potential in 18％H2SO4 solution (Solu.A) and the mixture solution of 18％H2SO4+5％C2H2O4 (Solu.B) at room temperature.12 and 11 V was optimized as the applied oxidation potential for 2198 and 5A90 a
A niobate/titanat nanoflakes (Nb/TiNFs) composite was synthesized via the hydrothermal method and used to remove Pb(II) from water. XRD, TEM, and SEM results indicate that Nb/TiNFs appear as nanoflakes, of which the primary crystal phase is tri-titanate.
The modification of graphitic carbon nitride can significantly improve the photocatalytic performance of graphitic carbon nitride (g-C3N4). Fe2O3/nitrogen-deficient g-C3N4-x composite catalysts were prepared with dicyandiamide as the precursor and Fe3+ do
Based on the experimental analysis and theoretical calculation,the self-propagating high temperature synthesis of TiB2/Fe composite was studied.The experimental results show that the interfacial between TiB2 and Fe was smooth and clear,and the composite b
SiC/7075 aluminum matrix composites were prepared by a liquid stirring method. The role of Ti facilitating the preparation of SiC/7075 aluminum matrix were studied by means of direct-reading spectrometer, scanning electron microscope, energy dispersive sp
The aluminum matrix composites (AlB2+α-Al2O3)/Al were fabricated by in situ reaction synthesis from an Al-B2O3 system. The reaction pathways, apparent activation energies and tensile properties were analyzed by using differential scanning calorimetry (DSC
Three as-cast and as-extruded Mg-5Zn-xY-0.6Zr (x=5 wt％,8 wt％,11 wt％) alloys were prepared,and the effects of Y content on the microstructures and mechanical properties of the alloys were investigated.The results show that the investigated Mg-Zn-Y-Zr alloy
We presented a simple yet convenient hydrothermal approach for the large-scale synthesis of uniform cylindrical silver (Ag) single-crystalline nanowires with diameters of about 25 nm and lengths of 1-4 μm. Poly(vinyl pyrrolidone) (PVP) was used as a reduc
To investigate the evolution of microstructure and wear behavior of TiSiN coatings with the variation of Si in targets and lays the foundation for its controllable mass production,Ti(1-x)SixN composite coatings were deposited onto Si (100) and cemented ca