Adsorption of Pb(Ⅱ) in Water by Niobate/ Titanate Nanoflakes

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:zs001444
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A niobate/titanat nanoflakes (Nb/TiNFs) composite was synthesized via the hydrothermal method and used to remove Pb(II) from water. XRD, TEM, and SEM results indicate that Nb/TiNFs appear as nanoflakes, of which the primary crystal phase is tri-titanate. Nb/TiNFs show rapid adsorption kinetics and the result fits well with the pseudo-second order model. The key mechanism of adsorption is ion-exchange between metal and -ONa/H. According to the Langmuir isotherm model, the maximum capacity of Pb(II) is 488.323 mg·g-1. The relatively low RL values indicate that Nb/TiNFs exhibit favorable adsorption of Pb(II). Nb/TiNFs indicate high adsorption capacity over a broad pH range. Co-existing inorganic ions (Na+ and Ca2+) have a slight inhibition effect on adsorption, and HA moderately inhibits the adsorption of Pb(II) on Nb/TiNFs. Because of the simple method of synthesis and high removal efficiency for heavy metals, Nb/TiNFs are a promising material in remediation of heavy metal polluted water.
其他文献
The physical and mechanical properties of self-compacting geopolymer concrete (SCGC)using chemically synthesized nano-geopolymer cement was investigated.Nano-geopolymer cement was synthesized using nano-silica,alkali activator,and sodium aluminate in the
In order to overcome the problem that the low conductivity and high content of graphitic N will lead to serious irreversible capacity loss, magnesiothermic denitriding method was employed to fabricate nitrogen deficient g-C3N4 (ND-g-C3N4). By controlling
The present work presents the microstructure of β-Ca2SiO4 (β-C2S) after accelerated carbonation.The synthesis procedure of β-C2S was examined first,and the crystalline and amorphous structure,the distribution and the pore structure ofβ-C2S carbonation pro
The SnO2 quantum dots (SnO2QDs)/ZnS nanosheets (ZnSNs) heterojunction was fabricated via an in-situ synthetic method at room temperature. Rhodamine B, potassium dichromate, and tetracycline were used to discuss the photocatalytic activities of the as-prep
Nitrogen and sulfur co-doped porous nanocarbon (ZIF-C-N-S) catalyst was successfully synthesized derived from ZIF-8 and thiourea precursors. The electrochemical measurements indicate that the as-obtained ZIF-C-N-S catalyst exhibits higher electrocatalytic
A novel aqueous Sn-S complex solution was applied as precursor to fabricate SnO2 electron selective layers (ESLs) for the hybrid perovskite solar cells (PSCs). The tin and sulfur powder were directly dissolved in a (NH4)2S water solution to form Sn-S prec
Three different kinds of sepiolite (Type A, Type B and Sepiolite fiber) were processed by calcination and analyzed by thermogravimetric analysis (TG), X-ray diffraction diffractometer (XRD), scanning electron microscopy (SEM), BET (specific surface area f
Herein, two nanoparticles with different dimensions, spherical carbon dots (C-dots) and sheet-like hectorite clay, were used as physical crosslinkers to fabricate C-dots-clay-poly(N-isopropylacrylamide) nanocomposite hydrogels (coded as C-dots-clay-PNIPAm
To evaluate the property and degradation characteristics of concrete prepared with aggregate contained montmorillonite,concretes were prepared with aggregates contained montmorillonite,and then concrete slump loss,compressive strength,electric flux,the re
2198 and 5A90 Al-Li alloys were anodized with a constant DC potential in 18%H2SO4 solution (Solu.A) and the mixture solution of 18%H2SO4+5%C2H2O4 (Solu.B) at room temperature.12 and 11 V was optimized as the applied oxidation potential for 2198 and 5A90 a