The Role of Ti in the Preparation of SiC/7075 Aluminum Matrix Composite

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:onepiece_bing
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
SiC/7075 aluminum matrix composites were prepared by a liquid stirring method. The role of Ti facilitating the preparation of SiC/7075 aluminum matrix were studied by means of direct-reading spectrometer, scanning electron microscope, energy dispersive spectrometer, X-ray diffraction and the sessile drop method. The results show that the SiC content in the SiC/7075 composite increases with an increase of Ti addition. The addition of Ti can significantly improve the wettability of SiC/Al system, there is a critical value of above 0.5% of Ti content in improving the wettability of the Al/SiC system at 1173 K. The temperature of the “non wetting-wetting” transition for the (Al-2Ti)/ SiC system is about 1123 K, the contact angle decreases to 88 ° at 200 seconds and reaches a stable contact angle of 28 ° at 2100 seconds.
其他文献
The SnO2 quantum dots (SnO2QDs)/ZnS nanosheets (ZnSNs) heterojunction was fabricated via an in-situ synthetic method at room temperature. Rhodamine B, potassium dichromate, and tetracycline were used to discuss the photocatalytic activities of the as-prep
Nitrogen and sulfur co-doped porous nanocarbon (ZIF-C-N-S) catalyst was successfully synthesized derived from ZIF-8 and thiourea precursors. The electrochemical measurements indicate that the as-obtained ZIF-C-N-S catalyst exhibits higher electrocatalytic
A novel aqueous Sn-S complex solution was applied as precursor to fabricate SnO2 electron selective layers (ESLs) for the hybrid perovskite solar cells (PSCs). The tin and sulfur powder were directly dissolved in a (NH4)2S water solution to form Sn-S prec
Three different kinds of sepiolite (Type A, Type B and Sepiolite fiber) were processed by calcination and analyzed by thermogravimetric analysis (TG), X-ray diffraction diffractometer (XRD), scanning electron microscopy (SEM), BET (specific surface area f
Herein, two nanoparticles with different dimensions, spherical carbon dots (C-dots) and sheet-like hectorite clay, were used as physical crosslinkers to fabricate C-dots-clay-poly(N-isopropylacrylamide) nanocomposite hydrogels (coded as C-dots-clay-PNIPAm
To evaluate the property and degradation characteristics of concrete prepared with aggregate contained montmorillonite,concretes were prepared with aggregates contained montmorillonite,and then concrete slump loss,compressive strength,electric flux,the re
2198 and 5A90 Al-Li alloys were anodized with a constant DC potential in 18%H2SO4 solution (Solu.A) and the mixture solution of 18%H2SO4+5%C2H2O4 (Solu.B) at room temperature.12 and 11 V was optimized as the applied oxidation potential for 2198 and 5A90 a
A niobate/titanat nanoflakes (Nb/TiNFs) composite was synthesized via the hydrothermal method and used to remove Pb(II) from water. XRD, TEM, and SEM results indicate that Nb/TiNFs appear as nanoflakes, of which the primary crystal phase is tri-titanate.
The modification of graphitic carbon nitride can significantly improve the photocatalytic performance of graphitic carbon nitride (g-C3N4). Fe2O3/nitrogen-deficient g-C3N4-x composite catalysts were prepared with dicyandiamide as the precursor and Fe3+ do
Based on the experimental analysis and theoretical calculation,the self-propagating high temperature synthesis of TiB2/Fe composite was studied.The experimental results show that the interfacial between TiB2 and Fe was smooth and clear,and the composite b