烟花爆竹火灾爆炸危害范围研究

来源 :2016消防科技与工程学术会议 | 被引量 : 0次 | 上传用户：wxjct

【摘要】

：

烟花爆竹作为民用爆炸物品,生产过程从原料到产品都是易燃易爆物质,稍有不慎,便会引起燃烧和爆炸,甚至造成重大伤亡事故,引起了人们的普遍关注.本文首先简要介绍了烟花爆竹燃烧反应机理,并对近几年烟火爆竹火灾爆炸事故进行了大量的统计,总结分析出了烟花爆竹火灾爆炸事故特点.在此基础上,将TNT当量模型应用于烟花爆竹火灾爆炸事故,结合实际计算出了爆炸伤害、破坏范围,对减少烟花爆竹火灾爆炸事故、保护人民生命财产

【作者】

：

彭玲刘松

【机构】

：

湖南消防总队长沙支队,湖南长沙天津消防总队北辰支队,天津

【出处】

：

2016消防科技与工程学术会议

【发表日期】

：

2016年4期

【关键词】

：

烟花爆竹火灾爆炸事故爆炸伤害破坏范围

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

The effects of grain refinement on the hot tearing and load behavior of AA7050 alloy

Understanding the load behavior of high-strength wrought 7XXX-series aluminum alloys is very important for the analysis of hot tearing mechanism in direct-chill casting.A newly improved T type mold is

会议

Changes of microstructure and tensile property in AlSi7Mg alloys with varying Mg content during T6 h

The typical amount of Mg added to hypoeutectic Al-Si alloys is ranged from 0.3 to 0.6 wt％.Mg addition over 0.6 wt％ induces residual Mg2Si precipitates during the solid solution treatment.Most of the w

会议

Investigation on the microstructure and mechanical properties of Al-Si-Mg alloy via hot extrusion

Al-Si-Mg foundry alloys are widely used in the automotive industry for making high integrity castings with a combination of low density, high corrosion resistance and excellent castability.Alloying wi

会议

3D in situ characterisation of micro-structure evolution during solidification or remelting using sy

Recent developments in synchrotron X-ray micro-tomography allow now to image materials in 3D with a spatial resolution of about one micrometer and a frame rate of about one second.Time and spatial res

会议

Influence of ultrasonic treatment on the formation of primary Al3Zr in an Al-0.4Zr alloy

The effect of ultrasonic treatment on the formation of primary Al3Zr was investigated by applying high intensity ultrasonic vibration to an Al-0.4Zr alloy.In order to study the efficiency of ultrasoni

会议

Precipitation behaviors of cubic and tetragonal Zr-rich phase in Al-(Si-)Zr alloys

The precipitation behaviors of Zr-rich phase in binary Al-0.5Zr and ternary Al-3Si-0.5Zr alloys were investigated by high resolution transmission electron microscopy and atom probe.After the alloys we

会议

Characterization of new dendritic doublon in aluminum-copper alloy

Dendrite is one of the most common crystalline patterns of metallic solidification microstructure.It is well known the anisotropy of interfacial energy plays a big role in growing direction choosing o

会议

Investigation of heterogeneous nucleation interface of TiB2 in Al alloys by atomic STEM-HAADF and EE

Refining Al alloy by TiB2 has been extensively investigated for several decades both in industry and academic.However, the grain refinement potency by TiB2 alone is not high as expected.The presence o

会议

A modified hot tearing criterion for direct-chill casting of aluminium alloys

The hot tearing prediction is very important during chill casting of aluminium alloys.However, the most existing hot tearing criteria have only limited predictive power when they were applied to direc

会议

Improving the corrosion resistance of hot-working mold steel against Al alloy melt by Ti/TiN/CrN coa

In order to reduce the adhesion tendency of aluminum melt on the die casting mold and extend the service life of the die, multi-arc ion plating was used to deposit Ti/TiN/CrN multi-layer coating on th

会议

烟花爆竹火灾爆炸危害范围研究

其他学术论文