【摘 要】
：
A Continuous Radio Frequency wave (13.56 MHz) plasma polymerization coatings of Aniline monomer on Nano-magnetic iron oxide synthesized by co-precipitation method were investigated as a function of va
【机 构】
：
Dept.of Mechanical and Materials Engineering, College of Engineering and Applied Science, University
【出 处】
：
13th Asia-Pacific Conference on Plasma Science and Technolog
论文部分内容阅读
A Continuous Radio Frequency wave (13.56 MHz) plasma polymerization coatings of Aniline monomer on Nano-magnetic iron oxide synthesized by co-precipitation method were investigated as a function of varying plasma power (20W,30W,40W,and 50W),reactor pressure (in the range (2-8) x10-2 Torr) and treatment time (30mins,60 mins,90 mins,and 120 mins) to achieve a core shell structure of magnetic nanoparticle (core)-Polyaniline (shell).
其他文献
The atmospheric pressure dielectric barrier discharge (DBD) is created between two cylindrical containers which are both filled with salt water solution,and two parallel glass plates with the thicknes
Dielectric barrier discharges (DBDs) with different configurations provide a simple technology to generate cold plasmas in atmospheric pressure gases.For both application-focused and fundamental studi
Generally,a dielectric barrier discharge(DBD)device contains one or two dielectric layers to form low temperature plasma,which limits the surface modification areas on films.A three-layer DBD device w
Cu2O nanoparticles were synthesized from the anodic dissolution method using gaseous plasma as the cathode electrode.The electrolyte was an aqueous solution of NaCI,and a Cu plate immersed in the solu
In the recent years,plasma jet has been investigated in various potential applications such as biomedical,sterilization,etc.for its friendly operating condition[1].However,limited by the electrical de
In this study,needle-array electrode was employed to generate a diffuse dielectric barrier discharge (DBD) under the application of VOCs removing from air.Both nanosecond pulse and sine AC high voltag
Atmospheric-pressure dc glow discharge with liquid electrode is one of the simple methods to obtain a stable plasma-liquid interface[1].This system is also considered as glow discharge electrolysis at
Electron-beam-generated plasma has a wide variety of industry,medicine,aerospace,and other applications,mostly due to its features on relatively low energy cost of ionization irrelative with the press
A photoemission-assist plasma (PAP) ion source can be generated with low kinetic energy ions (E,) estimated as low as 0.1~100eV,which was striking smaller than conventional ion beam source (few keV).A