In vitro degradation and biocompatibility of Mg-Nd-Zn-Zr alloy

来源 :Chinese Science Bulletin | 被引量 : 0次 | 上传用户:t_bear
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In this study,in vitro degradation and biocompatibility of Mg-Nd-Zn-Zr(NZK) alloy were investigated to determine its suitability as a degradable medical biomaterial.Its corrosion properties were evaluated by static immersion test,electrochemical corrosion test,scanning electron microscopy(SEM),and energy dispersive spectroscopic(EDS) analysis,and in vitro biocompatibilities were assessed by hemolysis and cytotoxicity tests.Pure magnesium was used as control.The results of static immersion test and electrochemical corrosion test in simulated body fluid(SBF) demonstrated that the addition of alloying elements could improve the corrosion resistance.The hemolysis test found that the hemolysis rate of calcium phosphate coated NZK alloy was 4.8%,which was lower than the safe value of 5%.The cytotoxicity test indicated that NZK alloy extracts did not significantly reduce MC3T3-E1 cell viability.Hemolysis test and cytotoxicity test display excellent hemocompatibility and cytocompatibility of NZK alloy in vitro.Our data indicate that NZK alloy has excellent biocompatibility and thus can be considered as a potential degradable medical biomaterial for orthopedic applications. In this study, in vitro degradation and biocompatibility of Mg-Nd-Zn-Zr (NZK) alloy were investigated to determine its suitability as a degradable medical biomaterial. Its corrosion properties were evaluated by static immersion test, electrochemical corrosion test, scanning electron microscopy (SEM), and energy dispersive spectroscopic (EDS) analysis, and in vitro biocompatibilities were assessed by hemolysis and cytotoxicity tests. Pure magnesium was used as control. The results of static immersion test and electrochemical corrosion test in simulated body fluid (SBF) demonstrated that the addition of alloying elements could improve the corrosion resistance. The hemolysis test found that the hemolysis rate of calcium phosphate coated NZK alloy was 4.8%, which was lower than the safe value of 5%. The cytotoxicity test indicates that NZK alloy extracts did not significantly reduce MC3T3-E1 cell viability. Hemolysis test and cytotoxicity test display excellent hemocompatibility and cytocompatibility of N ZK alloy in vitro. Our data indicate that NZK alloy has excellent biocompatibility and thus be considered as a potential degradable medical biomaterial for orthopedic applications.
其他文献
【摘要】目的探讨分析短暂性缺血发作患者血流变学改变及其临床意义。方法随机抽取在我院接受治疗的患有短暂性脑缺血的患者50例作为实验组,在随机抽取50例健康人作为对照组。比较观察两组患者血流学变化,进行对比分析。结果实验组红细胞压积、全血高切年粘度、全血低切粘度、血浆粘度、纤维蛋白原水平明显高于对照组,统计学上有意义(P0.05)。  1.2方法对随机抽取的这50例健康人做体检,保证这些人群无其他器质
本文研究了实验室合成的交换剂钛酸钠(ST)对模拟高放废水中锕系和裂片核素交换速度、吸附分配比和交换容量等交换性能,研究了某些阳离子及络合剂和辐照对其交换性能的影响。
【摘要】目的探讨甲状腺腺瘤手术的治疗方法。方法随机选取我院近年来收治的80例甲状腺腺瘤患者完整资料为回顾性分析依据。结果本组80例患者均康复出院,术后随访发现,行单侧甲状腺腺瘤切除术者无一例复发,双侧甲状腺腺瘤者中,2例行一侧次全切除另侧全切除术者于术后第3年因初次手术腺体肿瘤残留而复发。结论甲状腺全切除术或次全切除术为治疗甲状腺腺瘤的有效手段,首次手术方式的选择是否合理为决定术后甲状腺腺瘤复发的
本文叙述了防止压水反应堆压力容器脆性破坏的运行控制原理及用线弹性断裂力学理论计算运行限制压力的计算方法. This paper describes the operating principle of prevent
Effects of Nd on microstructure and mechanical properties of as-cast Mg-8Li-3Al alloy were investigated by OM,X-ray diffraction(XRD),EPMA,scanning electron micr
由两道8mm波段,一道4mm和一道2mm波段组成的四道微波干涉仪已经用在HL-1装置的等离子体电子密度测量上。2mm微波干涉仪测到了接近5×10~(13)(cm~(-3))的平均电子密度。在多道
【关键词】慢性阻塞性肺疾病;急性加重期肺炎;支原体感染;临床分析  107文章编号:1004-7484(2014)-06-3091-01  慢性阻塞性肺疾病(COPD)是临床常见呼吸系统疾病,冬季患病率上升,患者以老年人为主,病程长,往往呈现进行性加重,反复发作住院治疗,给患者带来极大痛苦。肺炎支原体(MP)与COPD的发生、发展关系密切。本文对2010年1月——2013年1月我院收治的246例C
摘 要:为了确保美术课程价值最大化实现,也为了使学生得到美的熏陶,更为了促使学生健康的成长,在课改下,教师要认真学习翻转课堂的核心思想,并有效地将翻转课堂与小学美术课堂结合在一起,以确保学生在高效、自主的美术课堂中掌握基本的美术技巧,同时也为提高学生的综合美术素养做出相应的贡献。  关键词:翻转课堂;小学美术;情境;绘画过程;鉴赏  所谓的翻转课堂是指让学生在课下完成相关的学习,在课堂上师生之间的
文章介绍了用Am-Be中子源得到5-10MeV能区单能γ射线,以及在反应堆上得到高能单色低本底γ射线的方法。它们可以用来刻度γ探测器如Ge(Li),HPGe,NaI(Tl)和BGO等的能量线性,能
[摘 要] 为了促进高职院校畜牧兽医专业学生的顶岗实习工作能顺利开展,对学生在实习中存在的问题进行总结分  析,并提出了相应的解决方法,以期提高学生顶岗实习的质量。  [关 键 词] 高职;畜牧兽医;顶岗实习  [中图分类号] G712 [文献标志码] A [文章编号] 2096-0603(2016)10-0121-01  近年来,大中型企业对高素质技能应用型人才的需求不断加大,职业教育对社会经济