再论双机架初轧机方案

• 作 者: 贺永康
• 机 构: 科技处,
• 出 处: 鞍钢技术
• 发表日期: 1981年02期
• 关键词: 初轧机 钢坯连轧机 开坯 延伸辊道 主电室 主电机 工作辊道 待轧 回转台 轧钢制度

我曾在《鞍钢技术》1980年第8期和第10期上发表过二初轧厂改造应采用双机架初轧机方案的论文,之后,有些同志也提出了不同的见解,本文拟针对有些同志的见解,从以下几个方面再论双机架初轧机方案。一、双机架初轧机方案的经济效益经过深入、细致地考虑之后,我认为采用如下的双机架方案更为合适:根据“前后一致”的设想,在第二初轧厂现有

I have published in the “Anshan Iron and Steel Technology,” No. 8 and No. 10 in 1980, the first two rolling mill transformation should be used two-rack draft mill program thesis, and afterwards, some comrades also put forward different views, this article is intended for some Comrade’s opinion, from the following aspects of the two-rack mill at the beginning of the program. First, the economic benefits of the two-stand rolling mill program After in-depth and meticulous consideration, I think the following two-rack solution is more appropriate: According to the “consistent before and after”