论文部分内容阅读
采用SolidWorks和ADAMS软件建立了锻造操作机的虚拟样机模型,用虚拟样机技术对钳杆机构进行了仿真分析,精确得出操作机设计所需的重要参数,计算了夹紧力的大小和驱动力矩的变化规律,合理地减小了夹紧缸的直径,为操作机的其他部分提供了更多的设计空间。在仿真结果的基础上,采用ANSYS软件对钳臂进行了优化设计,降低了节点的最大应力值。
The virtual prototyping model of the forging manipulator was established by SolidWorks and ADAMS software. The virtual prototype technology was used to simulate and analyze the clamp-rod mechanism. The important parameters required for manipulator design were obtained accurately. The clamping force and driving torque were calculated The reason is that the diameter of the clamping cylinder is reduced reasonably, which provides more design space for the other parts of the manipulator. On the basis of the simulation results, the optimal design of the clamp arm was carried out by ANSYS software, which reduced the maximum stress of the node.