论文部分内容阅读
Effect of Cooling Rate on the Formation and Morphology of (W,V)Cx in VC-doped WC-Co Cemented Carbide
【机 构】
：
School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100
【出 处】
：
金属学报（英文版）
【发表日期】
：
2017年2期
其他文献
The hot deformation characteristics and the corrosion behavior of a high-strength low-alloy (HSLA) steel were investigated at deformation temperatures ranging from 800 to 1100 ℃ and strain rates ranging from 0.1 to 10 s-1 using an MMS-200 thermal simulati
The tensile tests of AZ31 magnesium alloy were carried out under room temperature,100,150 and 200 ℃ with and without pulse current.The effect of temperature on dynamic recrystallization (DRX) of AZ31 alloy was studied at different conditions.One-parameter
Effect of Transverse Static Magnetic Field on Droplets Transient and Inclusions Evolution During the
The voltage was recorded to investigate the influence of the static magnetic field on droplet evolution during the magnetically controlled electroslag remelting (MC-ESR) process.MC-ESR experiments were carried out under different remelting current,and tra
In this study,the degradation efficiencies of zero-valent iron (ZVI) powders with different structures and components were evaluated for methyl orange (MO).The results show that the structure is an essential factor that affects degradation,and added non-m
The tribocorrosion behavior of 304 stainless steel was studied through comparing the damage behavior of 304 stainless steel in dilute sulfuric acid to that in distilled water by a reciprocating tribotester.The re-passivation behavior,the surface and secti
Effects of Welding Speed and Post-weld Hot Rolling on Microstructure and Mechanical Properties of Fr
The as-rolled AZ31 Mg alloy sheets are welded by friction stir welding (FSW) in this study,followed by annealing and hot rolling with different reductions.The effects of welding speed and the rolling reduction on the microstructure,tensile properties,micr
Effect of Pre-deformation on Grain Ultrafining by Intercritical Deformation in Low-Carbon Microalloy
In this study,the effect of pre-deformation at recrystallization and non-recrystallization zone on the grain ultrafining by the subsequent intercritical deformation (ID) was investigated on low-carbon microalloyed steel.The results showed that ultrafine g
Influence of different electric current modes (pulse and direct) on occurrence of the electroplastic effect under uniaxial tension in the coarse-grained alloys with martensite transformations is investigated.The materials are shape memory Ti49.3Niso.7 all
Thermal fatigue behaviors of two forged hot-work die steels subjected to cyclic heating (650 ℃)-water quenching were investigated.A martensitic hot-work die steel containing 10％ Cr (HHD),showing superior oxidation resistance and thermal fatigue resistance
The plastic deformation of the pipe made of Cu-based alloy hardened by incoherent nanoparticles and subjected to the uniform internal pressure was investigated.The limits of elastic and plastic resistance are determined.The insignificant excess in the lim