论文部分内容阅读
[!--newstext--]
[!--title--]
【摘 要】
：
Nickel plated on a copper plate was selected as a bond surface for ultrasonic aluminum wedge bonds, and a series of experiments were carried out to study the mi
【机 构】
：
School of Mechanical-Electronical Engineering
【出 处】
：
中国有色金属学会会刊（英文版）
【发表日期】
：
2004年期
其他文献
The process of laser butt welding of zinc-coated steel ( SGCD3 and WLZn ) blanks was presented, whose edges were prepared by laser cutting. The properties of th
3C-SiC films have been deposited on Si (111) substrates by the Iow-pressure vertical chemical vapor deposition (LPVCVD) with gas mixtures of SiH4, C3H8 and Ha.
Comparative study on fatigue properties of friction stir and MIG-pulse welded joints in 5083 Al-Mg a
The objective of this investigation was to compare the fatigue properties of friction stir welds with those of MIG-pulse welds. The 5083 Al-Mg alloy was welded
Losses of the alloying elements during vacuum induction melting of the binary NiTi alloys were evaluated by visual observation and chemical analysis of the NiTi
In the present study a modified CFD code KIVA3V was used to simulate the spray combustion in a small DI diesel engine fueled with DME. The improved spray models
The spreading behavior of copper filler metal droplets under arc brazing was studied by numerical simulation method using Surface Evolver software. The mathemat
Sustainable performance is expected to become a major factor when examining the feasibility of a construction project in terms of its life cycle performance. Th
Two types of electromagnetic edge dams were analyzed by using finite element method in present paper. The magnetic vector potential method and edge element meth
Affinity membrane was prepared with chitosan immobilized on the hydrophile- modified poly(vinylidene fluoride) (PVDF) membrane. Fourier transform infrared spect
NiAl / Al2O3 composite were synthesized by thermite reaction of nickel oxide and aluminum powder mixtures. The phase, the microstructure of the composite, as we