论文部分内容阅读
[!--newstext--]
[!--title--]
【摘 要】
：
Two types of electromagnetic edge dams were analyzed by using finite element method in present paper. The magnetic vector potential method and edge element meth
【机 构】
：
Key Laboratory for Advanced Manufacturing by Materials Processing Technology,State Key Laboratory of
【出 处】
：
材料科学技术学报（英文版）
【发表日期】
：
2004年期
【基金项目】
：
国家自然科学基金;the State Key Development Program on Foundation Research
其他文献
采用热重分析法(TG)对1,3-双(4-氨基苯氧基)苯(134BAPB)/均苯四甲酸二酐(PMDA)聚酰亚胺(PI)薄膜在氮气和空气气氛下的热失重过程进行了研究,并利用NETZSCH Thermokinetics动
Effects of combination modes of favorable growth unit of Al(OH)3 crystals precipitating on Van der W
The dipole moment, total energy, atomic charge, orbital population and orbital energy of four representative combination models of the favorable growth unit Al6
The twinning process of ZK30 +0.3Yb magnesium alloy was studied. The results show that twinning occurs at the initial stage of deformation, and decreases during
The process of laser butt welding of zinc-coated steel ( SGCD3 and WLZn ) blanks was presented, whose edges were prepared by laser cutting. The properties of th
3C-SiC films have been deposited on Si (111) substrates by the Iow-pressure vertical chemical vapor deposition (LPVCVD) with gas mixtures of SiH4, C3H8 and Ha.
Comparative study on fatigue properties of friction stir and MIG-pulse welded joints in 5083 Al-Mg a
The objective of this investigation was to compare the fatigue properties of friction stir welds with those of MIG-pulse welds. The 5083 Al-Mg alloy was welded
Losses of the alloying elements during vacuum induction melting of the binary NiTi alloys were evaluated by visual observation and chemical analysis of the NiTi
In the present study a modified CFD code KIVA3V was used to simulate the spray combustion in a small DI diesel engine fueled with DME. The improved spray models
The spreading behavior of copper filler metal droplets under arc brazing was studied by numerical simulation method using Surface Evolver software. The mathemat
Sustainable performance is expected to become a major factor when examining the feasibility of a construction project in terms of its life cycle performance. Th