论文部分内容阅读
齿厚游标卡尺外观结构见图1。检定规程中综合误差要求:不超过±0.02mm。检定方法:用直径偏差不超过±0.002mm的两个圆柱(或光面塞规)进行检定(见图2)。圆柱直径按下表选定:
The thick vernier caliper appearance structure shown in Figure 1. Verification procedures in the integrated error requirements: no more than ± 0.02mm. Test Method: Test with two cylinders (or smooth plugs) with a diameter deviation not exceeding ± 0.002 mm (see Figure 2). Cylinder diameter selected according to the following table: