Effect of HPMC on the Piezoresistivity of Smart Concrete Aggregate with Z Shape

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:luoqiaoshui
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Cement mortar with carbon fiber (CFc) and resin-cement mortar with carbon fiber (CFrc) were used as inner and outer cores of smart aggregate with Z shape, respectively, which was used as the basic perception units to prepare smart concrete aggregate with a mosaic structure (SAMS). The hydroxpropyl methylcellulose (HPMC) was taken into consideration to improve the properties of mortar; by using HPMC, the structure of SAMS was optimized and its mechanical and electrical properties were evaluated. The experimental results show that the toughness of mortar could be improved by the complex that formed by epoxy resin, and the effect of HPMC on the flexibility of CFc was greater than that on the flexibility of CFrc; the feasible designing indicates that the CFc-Z core and CFrc-Z core could be used as inner and outer cores of SAMS. When the proposed dosages of HPMC in inner and outer cores are 0.35wt% and 0.2wt%, respectively, it could give an effective prediction for the damage of concrete during the loading process.
其他文献
We obtained the reaction mechanism of cerium with oxygen by means of density functional theory (DFT) under the explosive or detonation situation. The energy level order of cerium was calculated and the potential energy profile was plotted. The properties
BaTiO3/epoxy composites consisting of two three-dimensionally interpenetrating networks of BaTiO3 and epoxy phases were prepared using a new approach. The BaTiO3/epoxy composites exhibit a colossal dielectric constant, low dielectric loss and high flexura
A high production efficiency synthesis method was used to produce a stacked vanadium nitride nanoparticle structure with an inexpensive raw material as an anode material and high surface area polystyrene was used the cathode material for lithium ion hybri
Polymer-based composite was investigated by embedding calcium copper titanate (CaCu3Ti4O12;CCTO) fillers into polytetrafluoroethylene(PTFE) matrix.The dielectric performances of the composite were investigated within the frequency range fiom 100 Hz to 1 M
Microstructure evolution and properties of hot-extruded Inconel 625 alloy were investigated at different creep temperatures, aging time and strain rates. The experimental results indicate that the Inconel 625 alloy exhibits an excellent creep resistance a
Cetyltrimethylammonium bromide (CTAB) was incorporated into silicon carbide whiskers (SiCw) to improve their hydrophobicity. The solution casting method was employed to develop composite membranes of polyvinylidene fluoride (CTAB-SiCw/PVDF) with different
The natural rubber/zinc disorbate composite was prepared by the in situ formation of zinc disorbate from zinc oxide and sorbic acid in natural rubber. The structure variations of fillers during mixing and vulcanization processes were studied by X-ray diff
Polycrystalline Bi4Ti3O12 thin films with various fractions of a-axis, c-axis and random orientations have been grown on Pt(111)/Ti/SiO2/Si substrates by laser-ablation under different kinetic growth conditions. The relationship between the structure and
A high-pressure hot-pressing process was applied to densify a commercial boron carbide-titanium diboride (B4C-TiB2) powder mixture. Nearly fully dense (98.6%) materials were obtained at 1700 ℃ under a pressure of 100 MPa. Compared to the sintering tempera
To elucidate the mechanism of brominated natural rubber (BNR),eight BNR samples with different bromine content were prepared from latex in different bromination time,and the microstructures were characterized by Fourier transform infrared spectroscopy (FT