论文部分内容阅读
A traveling wave tube measurement technique for measuring acoustic properties of underwater acoustic materials was developed.Water temperature and pressure environments of the ocean can be simulated in a water-filled tube,and the acoustic parameters of samples of underwater acoustic materials are measured in the range of low-frequency.A tested sample is located at central position of the tube.A pair of projectors is separately located at both ends of the tube.Using an active anechoic technique,the sound wave transmitting the tested sample is hardly reflected by the surface of secondary transducer.So the traveling sound field is built up in the tube.By separately calculating the transfer functions of every pair of double hydrophones in the sound fields from the both sides of the sample,its reflection coefficients and transmission coefficients are obtained.In the measurement system,the inside diameter of the tube isΦ208 mm,the working frequency range is from 100 to 4000 Hz,the maximum pressure is 5 MPa.The reflection coefficients and transmission coefficients of a water layer and a stainless steel layer samples are measured actually and calculated theoretically.The results show that the measured values are in good agreement with the values calculated,and the measurement uncertainty is not greater than 1.5 dB.
A traveling wave tube measurement technique for measuring acoustic properties of underwater acoustic materials was developed. Water temperature and pressure environments of the ocean can be simulated in a water-filled tube, and the acoustic parameters of samples of underwater acoustic materials are measured in the range of low-frequency. A tested sample is located at central position of the tube. A pair of projectors is separately located at both ends of the tube. Using an active anechoic technique, the sound wave transmitting the tested sample is hardly reflected by the surface of secondary soundtracks. of the traveling sound field is built up in the tube. By the transfer sound of every pair of double hydrophones in the sound fields from the both sides of the sample, its reflection coefficients and transmission coefficients are obtained. the measurement system, the inner diameter of the tube is Φ208 mm, the working frequency range is from 100 to 4000 Hz, the maximum p ressure is 5 MPa. The reflection coefficients and transmission coefficients of a water layer and a stainless steel layer samples are measured actually and calculated theoretically. The results show that the measured values are in good agreement with the values calculated, and the measurement uncertainty is not. greater than 1.5 dB.