论文部分内容阅读
在本刊12月号上的“哪张SCSI卡最适合你”中,有关IDE与SCSI规格比较表中(P.102).IDE的传输效率数据似乎不正确,据我所知,ATA/33的传输数据为33.3Mbps,而非33.3MB/s(1MB/s=8Mbps),ATA/66亦为66.6Mbps,单位不同而有8倍的速度差异,不知是我的信息有误,还是贵刊误用单位?(根据一般的使用经验.ATA/33的传输效率也应该只有33.3Mbps,否则连Fast SCSI都比ATA/33还慢) 读者魏秋桂先感谢读者来函指教,不过关于这个问题,并非是我们“误用”单位,而是这项传输接口规格书的定义就是如此,下面我们会提供相关资料的网站供
In the issue of December issue of “which one of the most suitable for you SCSI card”, the IDE and SCSI specification comparison table (P.102) .IDE transmission efficiency data does not seem right, as far as I know, ATA / 33 The transmission data is 33.3Mbps, instead of 33.3MB / s (1MB / s = 8Mbps), ATA / 66 is also 66.6Mbps, different units and 8 times the speed difference, I do not know my information is wrong, or your magazine Misuse of units? (According to the general use of experience. ATA / 33 transmission efficiency should only 33.3Mbps, or even Fast SCSI than ATA / 33 is also slow) Readers Wei Qiugui Thank readers for your advice, but on this issue, not Is our “misuse” unit, but the definition of the transmission interface specification is the case, the following we will provide information on the website for