论文部分内容阅读
新制的台秤,一般灵敏度的高低主要取决于横梁刀子的排列情况和重心与支点的鉛直距离。使用中的台秤,特別是年久失修的台秤,灵敏度的大小,往往取决于横梁以下各部零件的装配和損坏程度。台秤灵敏度稍差的,修理灵敏度应和修理載重差結合进行。台秤灵敏度很坏的,修理灵敏度应在修理变差之前进行。下面介紹三种检修灵敏度不良的方法。 1.剝皮法所謂剝皮法,就是逐步检查各部零件对灵敏度的影响。首先检查台秤灵敏度的好
The new scale, the general level of sensitivity depends on the arrangement of the beam knife and the vertical center of gravity and fulcrum distance. The scales in use, especially the aged scales, the sensitivity of the size, often depends on the beams below the various parts of the assembly and damage. Less sensitive platform sensitivity, repair sensitivity and repair load should be combined with the poor. Scale sensitivity is very bad, repair sensitivity should be carried out before the deterioration of the repair. The following describes three methods of poor maintenance sensitivity. 1. Skinning method The so-called skinning method, is to gradually check the various parts of the sensitivity of the impact. First check the scale sensitivity is good