论文部分内容阅读
An AFM (Atomic Force Microscope) based nanoindentation method for local measurement of mechanical properties near interfaces in both angular and blunted SiC particle reinforced LD2 composites is presented. The blunted composite exhibits an improved ductility than the angular counterpart. The nanoindentation examination shows that the micromechanical properties near interfaces distribute unevenly and vary with particle shape in the SiC p/LD2 composites. There are a higher nanohardness value and a lower plastic deformation capacity around an angular particle than around a blunted one. It is inferred that the residual stress and strain concentrations are severer around the angular particle, which causes matrix cracking at a lower external strain level and leads to a lower ductility of the angular composite.
The AFM (Atomic Force Microscope) based nanoindentation method for local measurement of mechanical properties near interfaces in both angular and blunted SiC particle reinforced LD2 composites is presented. The blunted composite exhibits an improved ductility than the angular counterpart. The nanoindentation examination shows that the micromechanical There are a higher nanohardness value and a lower plastic deformation capacity around an angular particle than around a blunted one. It is inferred that the residual stress and strain concentrations are severer around the angular particle, which causes matrix cracking at a lower external strain level and leads to a lower ductility of the angular composite.