论文部分内容阅读
The determination of gas pressure before uncovering coal in cross-cuts and in shafts is one of the important steps in pre- dicting coal and gas outbursts. However, the time spent for testing gas pressure is, at present, very long, seriously affecting the ap- plication of outburst prediction techniques in opening coal seams in cross-cuts and shafts. In order to reduce the time needed in gas pressure tests and to improve the accuracy of tests, we analyzed the process of gas pressure tests and examined the effect of the length of boreholes in coal seams in tests. The result shows that 1) the shorter the borehole, the easier the real pressure value of gas can be obtained and 2) the main factors affecting the time spent in gas pressure tests are the length of the borehole in coal seams, the gas emission time after the borehole has been formed and the quality of the borehole-sealing. The longer the length of the bore- hole, the longer the gas emission time and the larger the pressure-relief circle formed around the borehole, the longer the time needed for pressure tests. By controlling the length of the borehole in a test case in the Huainan mining area, and adopting a quick sealing technique using a sticky liquid method, the sealing quality was clearly improved and the gas emission time as well as the amount of gas discharged greatly decreased. Before the method described, the time required for the gas pressure to increase during the pressure test process, was more than 10 days. With our new method the required time is only 5 hours. In addition, the accuracy of the gas pressure test is greatly improved.
The determination of gas pressure before uncovering coal in cross-cuts and in shafts is one of the important steps in pre- dicting coal and gas outbursts. However, the time spent for testing gas pressure is, at present, very long, seriously affecting the ap- plication of outburst prediction techniques in opening coal seams in cross-cuts and shafts. In order to reduce the time needed in gas pressure tests and to improve the accuracy of tests, we analyzed the process of gas pressure tests and examined the effect of the length of boreholes in coal seams in tests. The result shows that 1) the shorter the borehole, the easier the real pressure value of gas can be obtained and 2) the main factors affect the time spent in gas pressure tests are the length of the borehole in coal seams, the gas emission time after the borehole has been formed and the quality of the borehole-sealing. The longer the length of the borehole, the longer the gas emission time and the larger the pressure-relief by controlling the length of the borehole in a test case in the Huainan mining area, and the a quick sealing technique using a sticky liquid method, the sealing quality was clearly improved and the gas emission time as well as the amount of gas discharged greatly decreased. The time required for the gas pressure to increase during the pressure test process, was more than 10 days. With our new method the required time is only 5 hours. In addition, the accuracy of the gas pressure test is greatly improved.