论文部分内容阅读
跃进22乳化型防锈油是近年来轴承行业研制成功的新型防锈封存材料，其优点是油膜薄、防锈期长、启封方便，而且使用安全、无毒无味。为了使这种新型防锈油能成功地用于轴承的封存，文中对轴承的清洗、过渡清洗耳恭听（为清除轴承经清洗后附着在上面的残留清洗液及污物而加的一道工序）。涂油、封存包装进行了研究。经八年多的使用实践证明：清洗剂采购员用664、温度以65-75C为宜、浓度以2-2.5%为佳。过流清洗液采用3%的跃进22乳液、温度以低温为好。涂油槽的浓度应控制在1：2-1：3范围内，配制时应不断搅拦，水徐徐加入油中后，应继续搅伴一段时间。包装材料最好采用聚已稀或聚氯已烯塑料。附表16个，参考文献5种。
Yuejin 22 emulsified rust-proof oil is a new type of rust-proof storage material successfully developed in the bearing industry in recent years. Its advantages are thin oil film, long anti-rust period, convenient unsealing, safe use, non-toxic and tasteless. In order to make this new anti-rust oil can be successfully used for bearing seal, the text of the bearing cleaning, transitional cleaning ears to listen to (to remove the bearing after cleaning attached to the residual cleaning fluid and dirt and a process. Oiled, sealed packaging was studied. After more than eight years of use proved: cleaning agent with 664 buyers, the temperature to 65-75C is appropriate, the concentration of 2-2.5% better. Over-flow cleaning solution using 3% leap 22 emulsion, the temperature is good at low temperature. Oiling tank concentration should be controlled in the range of 1: 2-1: 3, stirring should continue to be prepared when the water slowly added to the oil should continue to stir with some time. Packaging materials are best used poly-thinner or polychlorohexene plastic. Schedule 16, 5 kinds of references.