论文部分内容阅读
对由ABS树脂(即PNA-聚芮烯腈,PB-聚丁二烯和PS-聚苯乙烯的共聚树脂)组分的不同组合共混而成的材料PAN/PS、PAN/PB、PS/PB和PAN/PB/PS进行了静摩擦系数μ_s、动摩擦系数μ_k和摩损率V_s的滑动试验研究。试验表明,当PB共混含量为10～20％时,μ_k和V_s有较大的降低,润滑性能大大改善。 另外,对于与PB或PTFE(聚四氟乙烯)共混的POM(聚甲醛)或PA(聚酰胺、尼龙6)来说,当PB含量为5～20％时,μ_k和V_s大大降低,且PB含量5％时共混材料的μ_k值始终低于为人熟知的PTFE共混材料。试验发现,通过与PB共混极大地改善了极限PV值,达到了与PTFE共混的同样水平。
The materials PAN / PS, PAN / PB, PS / PS blends blended with different combinations of ABS resin components (ie, PNA-polyacrylonitrile, PB-polybutadiene and PS- PB and PAN / PB / PS were tested on the sliding test of static friction coefficient μ_s, dynamic friction coefficient μ_k and wear rate V_s. Experiments show that, when PB blend content is 10 ~ 20%, μ_k and V_s have a greater reduction, lubrication performance greatly improved. In addition, for POM (polyoxymethylene) or PA (polyamide, nylon 6) blended with PB or PTFE (polytetrafluoroethylene), μ_k and V_s are greatly decreased when the PB content is 5 to 20%, and The μ_k value of the blend at 5% PB is always lower than the well-known PTFE blend. The trial found that by blending with PB, the limiting PV was greatly improved, reaching the same level of blending with PTFE.