论文部分内容阅读
七、两种方法的差别 1.加工方法的差别成型-浸渍法与打浆-加料法,主要的不同在于打浆-加料法是将树脂加入到初始的浆液中去的。免除了树脂浸渍和烘箱固化的工序,大大地缩短了每个零件的制造周期,而且,相应的基建投资也可节省。打浆-加料法也大大地减少了制造可燃军械过程中的安全事故。在成型一浸渍法得到的毡制品的模压成形过程中,浸渍树脂以前的操作必须特别小心。未加工的不含树脂或水分状态的硝化棉,对于静电是非常敏感和易燃的。打浆-加
Seven, the difference between the two methods 1. The difference between processing methods Molding - impregnation method and beating - feeding method, the main difference is that the beating - feeding method is to add the resin to the initial slurry to go. The process of resin impregnation and oven curing is eliminated, the manufacturing cycle of each part is greatly shortened, and the corresponding capital investment can also be saved. Beating - feeding method also greatly reduces the safety accidents in the manufacture of combustible ordnance. Prior to the molding operation of the felt obtained by the molding-impregnation method, care must be taken before the resin is impregnated. Raw, non-resinous or moisture-conditioned nitrocellulose is very sensitive and flammable to static electricity. Beating - plus