简易气割槽钢胎靠模

• 作 者: 马邦武
• 机 构: 济南探矿机械厂,
• 出 处: 机械工人
• 发表日期: 1985年05期
• 关键词: 手工切割 割嘴 辅助工人 仿形 割炬 切割质量 手工操作 端平面 钢卷尺 工作效率

我厂在生产“泰山600米钻机”底盘时,所需的槽钢规格较多,数量也较大,采用原工艺进行划线、切割的手工操作方法远远满足不了需要。手工切割不但劳动强度大,切下的槽钢端面也不规整;而且还要另外增加两个辅助工人。为此,我们根据仿形原理自制了一种简易的气割槽钢胎靠模(如图1所示)。该胎靠模主要由胎靠模、无刻度自由尺、气割嘴三部分组成,现分述如下,仅供参考。

I plant in the production of “Taishan 600 meters rig” chassis, the required channel more specifications, the number is larger, the use of the original technology crossed, cutting manual operation far can not meet the needs. Manual cutting not only labor-intensive, cut the channel surface is not regular; but also added two additional workers. To this end, according to the principle of profiling made a simple gas cutting slot steel tire model (Figure 1). The tire model by the main tire mold, no scale free ruler, gas cutting nozzle composed of three parts, are described below, for reference purposes only.