Numerical simulation of typhoon-induced storm surge along Jiangsu coast,Part Ⅰ:Analysis of tropical

来源 :Water Science and Engineering | 被引量 : 0次 | 上传用户:fyps
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The Tropical Cyclone Best Track Dataset issued by the Shanghai Typhoon Institute of the China Meteorological Administration, for the period from 1949 to 2013, was analyzed, and the typhoons threatening the Jiangsu coast were categorized into three different classes in terms of track, including typhoons making straight landfall, typhoons active in offshore areas, and typhoons moving northward after landfall. On the basis of the 65-year dataset, the typhoon parameters of these three categories, including the central pressure and the maximum wind speed, were investigated. Statistical analysis suggested that the minimum central pressure increased northward and shoreward gradually. The relationship between the maximum wind speed and the minimum central pressure was established through second-order polynomial fitting. Considering typhoons No. 1210, No. 0012, and No. 9711 as the basic typhoons, ten hypothetical cyclones with typical tracks and minimum central pressure occurring during the period from 1949 to 2013 were designed, providing the driving conditions for numerical simulation of typhoon-induced storm surges along the Jiangsu coast. The Tropical Cyclone Best Track Dataset issued by the Shanghai Typhoon Institute of the China Meteorological Administration, for the period from 1949 to 2013, was analyzed, and the typhoons threatening the Jiangsu coast were categorized into three different classes in terms of track, including typhoons making straight landfall, typhoons active in offshore areas, and typhoons moving northward after landfall. On the basis of the 65-year dataset, the typhoon parameters of these three categories, including the central pressure and the maximum wind speed, were investigated. that the minimum central pressure increased northward and shoreward gradually. The relationship between the maximum wind speed and the minimum central pressure was established through second-order polynomial fitting. Considering typhoons No. 1210, No. 0012, and No. 9711 as the basic typhoons , ten hypothetical cyclones with typical tracks and minimum central pressure occurring during the per iod from 1949 to 2013 were designed, providing the driving conditions for numerical simulation of typhoon-induced storm surges along the Jiangsu coast.
其他文献
针对聚光光伏发电系统结构复杂,故障发生的概率高、产生故障的因素众多、对其进行故障诊断难度较大,基于以上原因提出了故障树理论和模糊理论相结合的分析法作为聚光光伏发电系
滚动轴承振动信号具有非线性和非平稳的特性,且在现实中较难取得大量故障样本进行故障诊断,鉴于此提出了一种基于集合经验模式分解(EEMD)和支持向量数据描述(SVDD)的轴承故障诊
基于LabVIEW软件的故障监测与诊断技术是虚拟仪器迅猛发展的产物,介绍了采用NI虚拟仪器与LabVIEW软件建立了天然气管道泄漏监测与诊断系统,包括信号采集、显示、存储、分析和诊
摔跤运动技术多而复杂,因此摔跤有其自己的科学训练手段与方法,技术训练在整个训练中占有相当重要的地位,同样摔跤技术训练在儿童少年的训练中也是主要任务之一。为了能使儿
钻头、铣刀、铰刀、丝锥等刀具常用高速钢和50钢对焊而成。焊缝中的未溶合和氧化物夹层等焊接缺陷会减弱刀具的强度,有时在全部机加工将要结束时,因焊缝处断裂而报废的情况
结合设备及运行实际,分析某热电厂1号锅炉后包墙管失效泄漏原因,包括:由于后包墙管与密封板的焊缝之间存在焊接缺陷,该处的焊缝在较大应力的作用下发生开裂,同时将后包墙管拉裂造
我厂生产的2105柴油机凸轮轴用QT60-2稀土镁球墨铸铁制成。凸轮轴外形见图1所示。最后热处理采用等温淬火。一般来说等温淬火的内应力较小,不易产生开裂.但凸轮轴在等温淬火
对某热电厂锅炉水冷壁吹灰器让管泄漏原因进行了分析,并结合实际实施相应的安全防范措施后,有效杜绝了类似事故的再次发生:①对锅炉所有吹灰器旁受热面管进行全面检查、测厚,对壁
会议
请下载后查看,本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view profile.
期刊
在变工况风力发电旋转机械故障趋势信息中,包含故障发展信息,同时也包含载荷变化、噪声等非故障信息,这些信息都具有能量耦合特征。传统基于能量变化的故障特征趋势预示方法不一
会议