【摘 要】
：
A novel fiber optic sensor based on optical composite oxygen-sensitive film was developed for determination of 2,4-dichlorophenol (DCP). The optical composite oxygen-sensitive film consists of tris(2,2\'-bipyridyl) dichloro ruthenium(II) hexahydrate (Ru
【机 构】
：
Information Science and Technology Department,Wenhua College,Wuhan 430074,China
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
A novel fiber optic sensor based on optical composite oxygen-sensitive film was developed for determination of 2,4-dichlorophenol (DCP). The optical composite oxygen-sensitive film consists of tris(2,2\'-bipyridyl) dichloro ruthenium(II) hexahydrate (Ru(bpy)3Cl2) as the fluorescence indicator and iron(III) tetrasulfophthalocyanine (Fe(III)PcTs) as bionic enzyme. A lock-in amplifier was used for detecting the lifetime of the composite oxygen-sensitive film by measuring the phase delay of the sensor head. The different variables affecting the sensor performance were evaluated and optimized. Under the optimal conditions (i e, pH 6.0, 25℃, Fe(III)PcTs concentration of 5.0×10-5 mol/L), the linear detection range, detection limit and response time of the fiber optic sensor are 3.0×10-7-9.0×10-5 mol/L, 4.8×10-8 mol/L(S/N=3), and 220 s, respectively. The sensor displays high selectivity, good repeatability and stability, which have good potentials in analyzing DCP concentration in practical water samples.
其他文献
A novel method was presented to create composite micelles of amphiphilic copolymers and Ag nanoparticles (NPs) in a three-dimensional co-flow focusing microfluidic device (3D CFMD). Self-assembly of the copolymers was initiated by the fast mixing of water
The FeNip/PP nanocomposites were successfully prepared by the two-step blending method and the permeable layer interface with thickness of 2 to 10 nm was formed on the surface of nanopowders. The interface is composed of the lattice and molecular chain, i
To improve corrosion and wear resistances of the Zirconium(Zr) based alloys which are widely applied in nuclear reactors and chemical corrosion-resistant equipment,a new surface modification scheme was designed to deposit a Zr75Cu25 coating on Zr substrat
A novel type of microencapsulated phase change materials (microPCMs) based on 1-tetradecanol (TD) core and silver-coated poly (melamine-urea-formaldehyde) (MUF) shell was successfully synthesized by in situ polymerization method followed by silver reducti
An optimal structure design of the lattice mismatched GaInP/GaInAs/Ge solar cell with high photoelectric conversion efficiency was proposed.Two-dimensional Bi2Te3 and Sb2Te3 nanosheets were prepared by solvothermal synthesis method used as thermoelectric
(ZrMg)xY2-2xMo3O12 (x=0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1) ceramics have been synthesized to obtain less hygroscopicity and negative thermal expansion. With increasing the substitution of (ZrMg)6+ (ion radius 7.2 ×10-11 m) for Y3+ (ion
Polyaniline (PANI)/Ce(NO3)3 composite with short fiber-like shape was synthesized successfully in a poly (2-arcylamido-2-methylpropane sulfonic acid) aqueous solution.A comparison of SEM images found that short fiber-like composites can be obtained by con
A novel solid-gas reaction preparation technology was used to adjust the composition and microstructure of the composite crystal materials by changing the preparation parameters. Compared with the commonly used sol-gel method, acid base neutralization sed
The formation and growth behavior of intermetallic compound (IMC) layers after introducing an electroless Ni-W-P metallization into the Sn-3.0Ag-0.5Cu (SAC305) solder joint during soldering and aging were investigated.The soldering was performed at 250 ℃
The Z-type ferrites of nominal composition Ba3Co2Fe24O41+x wt％ Bi2O3, where x=0.25, 0.5, 1.0, 1.5, 2.0, were prepared by conventional ceramic processes. The influence of Bi2O3 content on the bulk densities, microstructures, magnetic and dielectric propert