【摘 要】
：
A novel solid-gas reaction preparation technology was used to adjust the composition and microstructure of the composite crystal materials by changing the preparation parameters. Compared with the commonly used sol-gel method, acid base neutralization sed
【机 构】
：
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
A novel solid-gas reaction preparation technology was used to adjust the composition and microstructure of the composite crystal materials by changing the preparation parameters. Compared with the commonly used sol-gel method, acid base neutralization sedimentation method, hydrothermal method, and gas phase deposition method, the technology was relatively simplified and the elemental composition was controllable, without the use of openings and additives. A kind of multi-element composite porous metal oxide was obtained by pre-intercalation and decarburization. In order to increase the porosity of MoO3 material and promote the adsorption and diffusion of reactant molecules, the microstructure of MoO3 was studied. The preparation process of porous molybdenum trioxide by solid gas combination process was discussed, which provides an innovative idea for the design and preparation of new materials with a large specific surface area and other desirable properties.
其他文献
Mg-6Zn-xCe (x =0,0.6,1.0,2.0) alloy ingots with diameter of 50 mm were extruded into bars with diameter of 12 mm at 300 ℃.The microstructures were analyzed by X-ray diffraction,optical microscopy,scanning electron microscopy and transmission electron micr
A self-regulating humidity material with bamboo for the room was prepared. The activated carbons were prepared with the temperature rising rates of 5, 10, 15, 20 ℃/min and constant temperatures of 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, and 1500
PEO ceramic coatings including ZrO2-Al2O3-SiO2 in three phases were prepared on an Al-12.5％Si alloy in electrolyte solutions containing ZrO2 nanoparticles.The microstructures and phases of the coatings were analyzed by SEM and XRD,and the heat insulation
A novel method was presented to create composite micelles of amphiphilic copolymers and Ag nanoparticles (NPs) in a three-dimensional co-flow focusing microfluidic device (3D CFMD). Self-assembly of the copolymers was initiated by the fast mixing of water
The FeNip/PP nanocomposites were successfully prepared by the two-step blending method and the permeable layer interface with thickness of 2 to 10 nm was formed on the surface of nanopowders. The interface is composed of the lattice and molecular chain, i
To improve corrosion and wear resistances of the Zirconium(Zr) based alloys which are widely applied in nuclear reactors and chemical corrosion-resistant equipment,a new surface modification scheme was designed to deposit a Zr75Cu25 coating on Zr substrat
A novel type of microencapsulated phase change materials (microPCMs) based on 1-tetradecanol (TD) core and silver-coated poly (melamine-urea-formaldehyde) (MUF) shell was successfully synthesized by in situ polymerization method followed by silver reducti
An optimal structure design of the lattice mismatched GaInP/GaInAs/Ge solar cell with high photoelectric conversion efficiency was proposed.Two-dimensional Bi2Te3 and Sb2Te3 nanosheets were prepared by solvothermal synthesis method used as thermoelectric
(ZrMg)xY2-2xMo3O12 (x=0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1) ceramics have been synthesized to obtain less hygroscopicity and negative thermal expansion. With increasing the substitution of (ZrMg)6+ (ion radius 7.2 ×10-11 m) for Y3+ (ion
Polyaniline (PANI)/Ce(NO3)3 composite with short fiber-like shape was synthesized successfully in a poly (2-arcylamido-2-methylpropane sulfonic acid) aqueous solution.A comparison of SEM images found that short fiber-like composites can be obtained by con