论文部分内容阅读
图1所示工件上的斜孔在卧式车床上不用夹具是加工不出来的。为此,我们设计了一种车削夹具,它以工件的外圆定位,用压板压紧。经几年来批量生产实践,使用效果良好,保证了工件加工质量。
The slant hole on the workpiece shown in Fig. 1 can not be machined without the jig on the horizontal lathe. To this end, we have designed a turning fixture that is positioned with the outer circumference of the workpiece and pressed with a pressure plate. After several years of mass production practices, the use of good results to ensure the quality of the workpiece processing.