论文部分内容阅读
成功地安装了Win95或Win98以后,有时可能出现这样的情况:声卡不能发声。造成声卡不能发声的原因有以下几种: (1)没有安装声卡驱动程序:这主要是指不支持“即插即用”特性的声卡。 (2)Win95或Win98存在着与延用设备的兼容性问题。有些用户是从Win3x的基础上升级到Win95或Win98的,原声卡是16位的,而系统需要32位的标准配置。 (3)资源冲突。 (4)声卡与光驱之间的音频线没有连接。 (5)声卡硬件故障或与主板扩展槽接触不良。 针对上面所列举的5种情况,可以分别采用如下解决办法: (1)安装声卡驱动程序。对于“即
After successfully installing Win95 or Win98, sometimes this may happen: the sound card does not sound. Sound card can not sound the following reasons: (1) did not install the sound card driver: This is mainly does not support the “plug and play” feature sound card. (2) Win95 or Win98 compatibility problems with the delay in the use of equipment. Some users are upgrading from Win3x to Win95 or Win98, the original sound card is 16-bit, and the system needs 32-bit standard configuration. (3) Resource conflicts. (4) Audio cable between sound card and optical drive is not connected. (5) sound card hardware failure or poor contact with the motherboard expansion slot. For the five cases listed above, you can use the following solutions: (1) Install the sound card driver. For "that is