论文部分内容阅读
非引导软盘就是磁盘上不具有引导程序,不能在软驱上启动机器的数据磁盘。使用该类磁盘最不方便的就是当重新引导系统时必须打开驱动器门将其暂时取出,机器启动后再重新将其插入并关好驱动器门,否则就会出现死机现象,导致不得不重新启动机器,即浪费时间又影响设备使用寿命。虽然可以利用修改CMOS设置从C盘优先启动机器,其一是很多用户都不习惯这样做,另外有些机器没有这项功能。笔者通过分析系统启动原理,从软件上解决
Non-boot floppy disk is the disk does not boot, you can not start the machine on the floppy disk data disk. The most inconvenient to use this type of disk is that when you reboot the system, you have to open the drive door to temporarily remove it, and then re-insert the machine and turn off the drive door, otherwise there will be a crash, resulting in having to restart the machine, That is, a waste of time and affect the service life of equipment. Although you can modify the CMOS settings from the C drive priority to start the machine, one is that many users are not accustomed to doing so, while some other machines do not have this feature. I analyze the system startup principle, from the software to solve