论文部分内容阅读
Field emission characteristics of TiO2 nanotube arrays modified by depositing carbon
【机 构】
：
College of physics and Electronic Engineering,Northwest Normal University,Lanzhou 730070,China;State
【出 处】
：
第四届国际表面与界面科学与工程学术会议(The Fourth International Conference on S
【发表日期】
：
2009年12期
其他文献
In this paper,a CMOS fabrication technology-based humidity sensor has been designed,manufactured and tested.The sensors use parallel plate capacitor structure,the dielectric materials absorption/desor
The dispersion of CuO supported on γ-Al2O3 support was studied using X-ray diffraction.Highly dispersed or crystalline CeO2 would appear on the γ-Al2O3 support when CuO loading is below or more than i
会议
Optical Properties of Diamond-like Carbon Films for Antireflection Coating by RF Magnetron Sputterin
ZnO is an Ⅱ-Ⅵ semiconductor with various interesting electrical,optical,acoustic and chemical properties due to its wide bandgap of 3.4 eV and a large exciton binding energy of 60 meV at room temperat
Comparing passivation ability of anti-reflective SiNx∶H film and thin thermal grown SiO2 on solar gr
In this paper,the passivation ability of industry anti-reflective SiNx∶H film and thin thermal grown SiO2 on solar grade silicon wafers was compared.Polish and texture wafers with and without emitter
Deposition and characterization of BiFeO3 thin films by pulsed laser deposition on GaN and AlGaN/GaN
BiFeO3 (BFO) thin films was deposited by pulsed laser deposition (PLD) on GaN and AlGaN/GaN semiconductor substrates.It was found that BFO films deposited directly on GaN show polycrystalline state wi
会议
Crystalline silicon surface passivation with SiON∶H films deposited by medium frequency magnetron sp
Hydrogenated silicon oxynitride (SiON∶H) could be used as a passivation layer,especially on the back side of the cell.In this work,it were deposited on crystalline silicon substrates by medium frequen
Surface passivation is one of the key factors to the high efficiency solar cells.In this paper (Al2O3)x(TiO2)1-x dielectric films used as backside surface passivation for crystalline silicon solar cel
Gettering process is commonly used to increase the minority carrier lifetime of silicon wafers and thus the conversion efficiencies of the solar cells fabricated on the wafers.In this paper,the effect
会议