• 不 限
  • 期刊论文
  • 硕博论文
  • 会议论文
  • 报 纸
  • 英文论文
  2. 您的位置
  3. 首页
  4. 会议论文
  5. Design of an experimental loop for research Transport-Deposition behavior of corrosion product on fu

Design of an experimental loop for research Transport-Deposition behavior of corrosion product on fu

来源 :第13届中日双边先进能源系统和聚变裂变工程材料会议(CIS-13) | 被引量 : 0次 | 上传用户：jinwei001
【摘 要】
：
In primary loop,corrosion products in coolant flow come from radioactive zone and deposit on equipment and piping to produce radiation field.Research to determine the behavior of corrosion products de
【作 者】
：
Xin Xu Yan Ma Jinyun Lei Yixue Chen 
【机 构】
：
School of Nuclear Science and Engineering,North China Electric Power University,Beijing 102206,China
【出 处】
：
第13届中日双边先进能源系统和聚变裂变工程材料会议(CIS-13)
【发表日期】
：
2016年3期
【关键词】
：
Corrosion Product Transport-deposition Experimental Loop Fusion Reactor 
下载到本地 , 更方便阅读
下载此文 赞助VIP
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
　　In primary loop,corrosion products in coolant flow come from radioactive zone and deposit on equipment and piping to produce radiation field.Research to determine the behavior of corrosion products deposition is very important from many technical aspects like; to analyze accidents,dose assessment,radiation protection optimization and radioactive waste management of reactor.
其他文献
Brazing of SiC with micro-alloying enhanced low activation Cr-Si-Me alloys for fusion applications
It is necessary to develop the joining technology for silicon carbide(SiC)and its matrix composites in advanced fusion reactors when it used as blanket structural material and flow channel inserts.Hig
会议
SiC/SiC compositeJoiningCr-Si alloyLow activation
Influence of Zr addition on the mechanical properties of ODS steels and the investigation of strengt
In order to investigate the influence of Zr addition on the mechanical properties of oxide dispersion strengthened(ODS)steels,tow contrastive compositions of Fe-14Cr-1.5W-0.3Ti-0.45Y2O3 and Fe-14Cr-1.
会议
ODS steelsmechanical propertiesin-situ TEM
Development of novel low activation High-Entropy alloy Fe-Cr-V-Ti-X for nuclear reactors application
The service temperature of reduced activation ferrite/martensite steels(RAFM)in fusion reactors is expected to be around 550 ℃,and higher service temperature heat-resistant alloys such as ODS steels i
会议
High entropy alloyLow activationMicrostructureMechanical strength
Experiments on the magnetomechanical properties of the china low activation martensitic steel
China low activation martensitic(CLAM)steel is considered as a candidate structural material for the blankets in China Tokamak fusion reactor.In order to evaluate mechanical properties of the structur
会议
MagnetostrictionPiezomagneticCLAM steelCoupling effect
Effects of strain rate and deformation degree on the microstructure of low carbon RAFM steel
Compared with cold forming,hot forming is more appropriate for the high-strength and low plasticity RAFM(reduced activation ferritic/martensitic)steels used in the fusion energy systems.It is importan
会议
Strain rateDeformation degreeMicrostructureRAFM steel
Brazing of SiC with high temperature low activation Ti-Si-Me alloys for fusion applications
SiC/SiC composites are the promising materials for flow channel insert and structural material in advanced fusion reactors.In order to obtain large size composite parts,development of joining technolo
会议
SiC/SiC compositeJoiningTi-Si alloyShear strengthMicro-alloying
The corrosion behaviour of CuCrZr alloy in the water coolant of fusion reactor
The corrosion tests in pure water at 150°C were performed to investigate the corrosion behavior of CuCrZr alloy at different dissolved oxygen content and different flow rate.The weight loss of the all
会议
CuCrZr alloycorrosionfusion reactordissolved oxygenflow rate
Creep deformation and rupture behavior of CLAM steel at 923K
The creep deformation and rupture behavior of CLAM steel has been studied in this article.Creep test were carried out at 923K over a stress range of 90-140MPa.The microstructure of the deformation zon
会议
China low activation martensitic steelHigh temperature creepMicrostructurePre
Effect of the precipitates on austenite grain growth in RAFM steel
Effect of the different types of precipitates and precipitation-dissolution behaviors on austenite grain growth in reduced activation ferritic/martensitic(RAFM)steel was studied by using metallography
会议
RAFM steelAustenite grain growthModellingPrecipitates
Experimental study on the deposition of corrosion products in fusion reactor
Deposition of corrosion products increases radiation in primary coolant loops of reactor.Therefore,the deposition and migration behavior of corrosion products is examined in this experiment.Objective
会议
DepositionCorrosion ProductsFusion Reactor