Analysis of design temperature for autoclave

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户：wowo925

【摘要】

：

　　Analyzing the influence of the design temperature for autoclave.In order to obtain the temperature distribution of main pressure part for autoclave,building

【作者】

：

LiShengjin;

【机构】

：

Avic APC integration equipment co.,LTD,Beijing 102206,China

【出处】

：

第二届中国国际复合材料科技大会 (CCCM-2)

【发表日期】

：

2015年期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　Analyzing the influence of the design temperature for autoclave.In order to obtain the temperature distribution of main pressure part for autoclave,building partial 3 dimensional heat-transfer models for autoclave,and calculating by means of commercial soft ware.Providing that the regular design is uneconomic.Based on results, reducing the design temperature and decreasing the thickness of the body steel plate are viable.

其他文献

Estimation of product quality manufactured by the autoclave/VARI process

　　Advantages and disadvantages based on comprehensive analysis of the autoclave and vacuum assisted resin infusion (VARI) have been discussed and synthesized.

会议

Research ongraphene/poly(vinyl alcohol) nanocomposite

　　Graphene with its unique propertieshas a bright future in the application of composite materials.In this study, for graphene oxide (GO) as the precursor, ba

会议

Effect of Stitching on Mechanical Properties of MT300 Carbon Fabric/EpoxyComposites

　　Stitched MT300carbon fabric/epoxycomposites were prepared by RTM process.The effects of stitching density, stitching orientation, and combination of stitchi

会议

Experimental study on the elastic recovery effect of fabric preform in vacuum infusion molding proce

　　Through the monitoring of fabric preform thickness and fiber volume fraction changes with resin in-plane flow and out-plane flowin vacuum infusion molding p

会议

Design and Production of Filament-wound Composite Pressure Vessels

　　The conventional filament winding process is primarily relying on the geodesics, semi-geodesics or planar winding patterns, which exhibit fewer degrees of d

会议

Research on hot-press bonded mechanism and designing for Prepreg

　　According to the requirement of high efficiency and high reliability for prepregchange in Automatic Placement and Tape Winding, the theology theory and the

会议

Modeling of Cutting Forces in Turning of Al/SiC composites

　　Changing of cutting force has an important effect on metal cutting process in cutting aluminum-based SiC particle reinforced metal matrix composite(MMCs).An

会议

The Optimization of Composite Material Winding Strategy Based on Robot

　　The industrial robot with the characteristic of multi degree of freedom, good flexibility, high repeated accuracy and strong expansibility, is widely used i

会议

Design and Applicationof the Wireless Transmission Tension Test-controlled System based on PLC

　　The wireless transmission tension test-controlled system automatic controlled by PLC has been introduced according to the winding tension of the vertical wi

会议

The study on Automated Fiber Placement system for thermoplastic composite

　　The fiber reinforced thermoplastic composite has broad prospects in aerospace field due to its advantages of high specific strength, high specific modulus,

会议

Analysis of design temperature for autoclave

其他学术论文