Study on the tensile failure mechanism for structureof scarf bonded CFRP

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户：slgull

【摘要】

：

　　Boned repair and joint for Carbon Fiber Reinforced Plastics (CFRP) have been widely used.However, the failure mechanism under the plane loads is not suffici

【作者】

：

LIUBin;XUFei;

【机构】

：

School of Aeronautics,Northwestern Polytechnical University,Xi'an 710072,China

【出处】

：

第二届中国国际复合材料科技大会 (CCCM-2)

【发表日期】

：

2015年期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　Boned repair and joint for Carbon Fiber Reinforced Plastics (CFRP) have been widely used.However, the failure mechanism under the plane loads is not sufficient and detailed,especially for the discussion and research on the primary structure repair.Therefore, a kind of simplified CFRP structure of scarf bonded was adopted and investigated by tension experiment and simulation, which are used for studying the tension performance of scarf bonded repair and joint.We analyzed the strain on the specimens and the load capacity.

其他文献

新型复合材料舱体结构静态力学性能研究

　　本文在对一种新型的对开式复合材料舱体结构进行透彻理解与分析的基础上，对结构件模型进行工程意义上的合理简化，总结出针对此类典型结构件的一套工程适用的静力有限元建模

会议

新型复合材料舱体结构静态力学典型结构件力学分析方法静力复合材料结构有限元软件

金属和复合材料运用于起落架部件的力学及疲劳性能综合分析

　　由于复合材料比铝合金及钢具有更高的强度/重量比，以及更好的疲劳性能、耐腐蚀性等特性，其在飞机结构上的应用越来越广泛。本文的研究目的在于通过计算和分析来研究复合材

会议

金属复合材料材料运用飞机起落架力学疲劳性能耐腐蚀性飞机结构

天然纤维复合材料相对湿度和温度依赖的力学性能退化行为:理论模型

　　天然纤维增强复合材料在大量吸湿后会发生显著的力学性能退化。现有的实验证据表明该力学性能退化过程很大程度依赖于外部环境的相对湿度和温度。本文针对天然纤维复合材

会议

大型复合材料风电叶片的疲劳寿命分析与验证

　　复合材料疲劳性能评估对大型风电叶片寿命预测至关重要，根据叶片的受载特点，本文介绍了一种基于S-N曲线和Palmgren-Miner线性疲劳损伤累积法则的寿命估计方法。疲劳试验是

会议

复合材料叶片风电疲劳寿命疲劳损伤累积复合材料疲劳可靠性评估指导意义试验验证

The Differences between Composite andMetal about Vibration LooseningCharacteristics of Joints

　　The paper is based on a forced bending vibration test, at first we adjust the composite connection and metal connection to the same natural frequency by add

会议

Finite element simulation of micro-mesoscopicmechanics of the three-dimensional braidedcomposite tru

　　By establishing the representative volume element (RVE) model of three-dimensional (3D) six-directional braided composites, stiffness prediction of the comp

会议

基于修正偶应力理论的斜交铺设层合薄板模型与尺度效应

　　本文建立了基于各向异性修正偶应力理论的只含有一个尺度参数的复合材料斜交铺设的层合薄板模型，并分析了铺设角对尺度效应的影响。基于Kirchhoff假设和虚功原理推导了任

会议

修正偶应力理论斜交铺设层合板薄板模型尺度效应各向异性

Influence of moisture absorption on the bearing capacity of single lap composite joints

　　In order to study the influence of moisture absorption on the bearing capacity of composite joints, three groups of absorption rates tests under water envir

会议

Impact and compression residual strength analysis ofcomposite multi-step bonded joints

　　Due to its high load-carrying efficiency, multi-step bonded joints are widely used in composite joints and repairs.A new multi-step manufacturing process wa

会议

Multi-plates of composite and metallic bolted joint FEidealization and fastener load distribution

　　It's inevitable to face composite and metallic hybrid joint structures during the modem aircraft design process.Particularly for the design of key joint are

会议

Study on the tensile failure mechanism for structureof scarf bonded CFRP

其他学术论文