Study on rapid aging process for conductive Al-Si-Mg alloys

来源 :15th International Conference on Aluminium Alloys(ICAA15)(第十 | 被引量 : 0次 | 上传用户：weike112121

【摘要】

：

An orthogonal hardness test of 4 factors, the first order aging temperature (T1) and time (t1), and the secondary aging temperature (T2) and time (t2), with 3 levels was adopted to obtain a rapid agin

【作者】

：

Hengcheng liao Ye Liu Qigui Wang

【机构】

：

School of Materials Science and Engineering, Jiangsu Key Laboratory for Advanced Metallic Materials,

【出处】

：

15th International Conference on Aluminium Alloys(ICAA15)(第十

【发表日期】

：

2016年3期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

Rapid homogeneous precipitation of nano-sized Si particles in Al-1%Si alloy realized by electric pul

This talk reports the enhancement of electric pulses on the homogeneous precipitation of nano-sized Si particles in Al-1％ Si alloy.Compared with the conventional air furnace treatment, electric pulses

会议

Invited:Novel alloy design-breakthrough traditional Al alloy designation

In traditional AA designation, Al alloys have been designated based on main alloy elements.However, with modem alloy design tools such as computation aided alloy design, Al alloys could be developed b

会议

Stored energy and microstructures in nanostructured Al-Cu-Mg alloy processed by high-pressure torsio

Differential scanning calorimetry (DSC) measurement of the stored energy is commonly used in nanostructured metals and alloys produced by severe plastic deformation (SPD).In this study, an ultra-high

会议

Microstructure and mechanical properties of synergistically strengthened Al/Si/Al2O3/Graphenes nanoc

Al-Si matrix composites are widely used in rail transportation, automotive, aerospace and other fields owing to its high specific strength, specific stiffness, high wear resistance and corrosion resis

会议

Design and fabrication of tri-modal aluminum composites by stir casting technique

Aluminum matrix composites (AMCs) are widely used because they combine the advantages of the matrix and the reinforcement phase.To serve both function and structure purposes, it is desirable to proces

会议

Reduced macrosegregation in A4xxx alloy by melt conditioned DC (MC-DC) casting technology

Macrosegregation refers to the variation of composition on a large scale across the whole cross section of casting.This defect can be very severe for large sized direct chill (DC)casting billets/ingot

会议

Effect of micro-alloying of transition elements on dynamic precipitation of Mg2Si phase during hot-r

Effect of micro-alloying of transition elements in the near eutectic Al-Si-Mg base alloy on dynamic precipitation of Mg2Si phase during hot-rolling and its impact to mechanical properties were investi

会议

Mechanical properties and precipitation behavior of Al-Sc-Zr and Al-Sc-Zr-Er alloy during artificial

The precipitation process and resulted hardening responds of two as-cast Al-Sc-Zr and Al-Sc-Zr-Er alloys during post-solidification ageing were investigated, aiming at developing cost-effective alumin

会议

Recycling of aluminium alloys using robust optimization technology for automobiles from whole life c

Recycling of aluminium alloys for automobiles from whole life cycle perspective, which processes end-of-life automobile components that are made of aluminium alloys with disassembly, testing, regenera

会议

Invited:Synthesis of novel aluminium based composite materials exhibiting magnetic properties fabric

Aluminium based composite materials with exhibiting magnetic properties were fabricated using a mixture of pure aluminium and ferrite powder via mechanical alloying (MA) and subsequently spark plasma

会议

Study on rapid aging process for conductive Al-Si-Mg alloys

其他学术论文