【摘 要】
：
Energy conservation is one of the vital issues of the present,and the reuse of discarded energy is a highly recommended method for saving energy.In this study,a heat pump–boiler integrated system was
【机 构】
：
School of Mechanical Engineering,Kookmin University,Seoul 136-702,Korea
【出 处】
：
2016冷冻空调亚洲大会(8th Asian Conference on Refrigeration and Air-c
论文部分内容阅读
Energy conservation is one of the vital issues of the present,and the reuse of discarded energy is a highly recommended method for saving energy.In this study,a heat pump–boiler integrated system was selected,and mathematical models of the boiler were developed in order to derive an appropriate control algorithm.The static models of the heat exchanger,gas valve,blower,and burner were constructed,and the dynamic models were formulated based on the assumption of a first-order system with a time delay.Moreover,tests were performed in order to check the validity of the proposed mathematical models,and the results demonstrated adequate prediction of the boiler performance.
其他文献
This article presents the energy saving retrofit implements and operating analysis of the HVAC system in ITRI biomedical factory.The system adopts heat pump rather than electrical heater to provide ho
This simulation study aims at the energy and condensation analysis of chilled beam system in the office building in Taiwan,where is in hot and humid climate.EnergyPlus simulation program is used in th
The present study has been carried out to analyze the heat transfer characteristics of gaskets in the mullion region of frost-free refrigerator/freezer.A 3D numerical model for the mullion region betw
A 200RT centrifugal refrigerant compressor had been totally designed and analyzed.The objectives of the design are high efficiencies at full load and partial load conditions.The design procedure inclu
Electroplating wastewater treatment system based on evaporation crystallization coupled with heat pump is proposed in the paper,whose merits are high efficiency,low energy consumption,zero discharge a
This study investigated methods for improving the performance of heat exchangers for use in the hot-water supply side of a heat-pump-type water heater system.The pressure drop and heat transfer charac
With rapid development of electronic devices,internal heat generation in those becomes significantly denser.Accordingly,their thermal management becomes increasingly important for the stable operation
This study performs experiments to examine the single-phase heat transfer and pressure drop in small-diameter microfin tubes 2.5–4 mm outer diameter using water as the test fluid.The geometric paramet
This paper is focused on design,analysis,fabrication and tests of a high-power and high-speed motor for adopting in a centrifugal compressor with an AMB.A novel approach for retaining the PMs of the r
The functional formula of the flow coefficients for the radial clearance in a rolling piston rotary compressor was developed by the experiments and Computational Fluid Dynamics(CFD)to improve the accu