论文部分内容阅读
一、分析二手光伏设备的优劣，发展方向。二手光伏设备如何配置，及二手光伏设备市场发展趋势与障碍。
二手光伏设备配置的技术关键
【摘 要】
：
一、分析二手光伏设备的优劣，发展方向。二手光伏设备如何配置，及二手光伏设备市场发展趋势与障碍。
【机 构】
：
江苏丰阳信息科技有限公司
【出 处】
：
SNEC 第十届(2016)国际太阳能产业及光伏工程(上海)论坛
【发表日期】
：
2016年11期
其他文献
Inline inspection is widely used in most industries to do process control and quality inspection.Due to increasing throughput and decreasing manual work in solar industry the average amount of inspect
会议
提出在晶硅表面干法制绒降低反射率的想法已有20多年历史，但由于装备和工艺的缺陷，该技术一直没有得到量产推广.本演讲介绍一种基于线性等离子源技术的链式传输设备，它通过化学气体(SF6+O 2+Cl2)在射频电场的激发下形成等离子体，这种新的RIE干法制绒能在晶硅表面形成350纳米开口的倒金字塔绒面.经过干法制绒的多晶硅电池，光反射率从7％降低到小于3％，从而使多晶硅电池转换效率提升0.6％以上.
会议
Passivated contacts have been shown to be very promising for silicon cells due to a reduction of the metal-semiconductor surface recombination,resulting in high open circuit voltages and efficiencies.
会议
Heterojunction Solar Cell Production:Wet Chemical Processing and Contact Formation by Physical Vapor
We present data on two decisive process steps within the heterojunction silicon solar cell production flow:Wet chemical processing and physical vapor deposition (PVD) of transparent conductive oxide (
会议
Advanced PECVD reactor concept for high-throughput,double side passivation layers for heterojunction
The speech introduces a new cluster deposition system named OCTOPUS,having a couple of new PECVD reactor elements for RF and VHF thin film deposition,such as the proprietary mirror reactor concept,whi
会议
Today,PERC is the technology of choice in p-type high-efficiency cell manufacturing.Especially for monocrystalline wafers,two main challenges have been identified that limit cell efficiency:emitter pe
会议
We are reviewing the key features of a newly developed batch wet chemical tool.The basic SILEX Ⅱ system achieves an output of up to 3,000 wph,upscaling of batch size will cover tool capacity up to 600
会议
本文回顾了一种创新的在线的解决方案，集成到Despatch金属化烧结炉设备的新发展PowerLockTM技术和应用在单晶及PERC太阳能电池的LID表现.PowerLockTM技术可以实现高达20个太阳的光强度.其优势包括在低的功耗下达到非常高的光强度，可控的工艺温度，占用空间最小，并无需物料输送设备.Despatch的PowerLockTM抑制单晶PERC太阳能电池的光衰可由原来的3-6％下降到
会议
Advantages of transition to 4 and 5 busbar front contact grid designs for Ni/Cu/Ag plated silicon so
The standard screen printed three busbar (BB) design is complemented by four or five busbar designs and several manufacturers have already included these in their product range.Advantages of the incre
会议