Bending of 3-D Natural Fiber Fabric Reinforced Composites

来源 :第七届亚澳复合材料会议 | 被引量 : 0次 | 上传用户：dongchangnie

【摘要】

：

Manufacturing techniques and bending properties of three-dimensional (3D) natural fiber composites were investigated in current research.Jute fiber yarn was used to weave orthogonal 3-D preforms by a

【作者】

：

Jieng-Chiang Chen Chin-Chih Yang Chang-Mou Wu Zhi-Jie Xu Yi-An Teng

【机构】

：

Graduate Institute of Materials Science and Technology,Vanung University,Chungli,Taiwan

【出处】

：

第七届亚澳复合材料会议

【发表日期】

：

2010年4期

【关键词】

：

3D preform natural fiber three-point bending composite failure

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　Manufacturing techniques and bending properties of three-dimensional (3D) natural fiber composites were investigated in current research.Jute fiber yarn was used to weave orthogonal 3-D preforms by a modified Dobby loom.The natural fiber yams were treated with sizing agent to improve strength, so that, the yarn can be used to weave as a 3D orthogonal fabrics by the loom.The preforms after woven have been treated with an alkaline solution to remove oil that inhibited by the fibers.

其他文献

Study on Different Spinning Process to Electrical Resistance Properties of Anti-Static Polyester Fib

In this study, we investigated different spinning processes to electrical resistance properties of anti-static polyester fiber.We demonstrated that using sheath/core cross-section of bicomponent fiber

会议

Polyesterspinningelectrical resistancefiberanti-static

Photodecolouration of Methyl Blue Using TiON/Polyol Composite Photocatalyst Coatings Under Visible L

In this study, TiON/Polyol composite coatings on PET substrates were prepared as photocatalyst layers in thin film reactor for the photodecolouration of methyl blue (MB) under visible light irradiatio

会议

TiONPolyolPETDopedPhotodecolouration

The Bending and Impact Behavior of CNT/GFRP Laminate Composites for Wind Blade Composite Material

The synergetic effect of Multi-walled carbon nanotube (MWCNT), and glass fiber (GF) on the static and dynamic mechanical, and thermal properties of MWCNT/ epoxy (EP), glass fiber reinforced polymer (G

会议

Carbon nanotubesThe coefficient of thermal expansionGlass fiberEpoxy

Cathodoluminescence Analysis for Improvement of Phosphors Fabricated by a Combinatorial Ink-Jet Prin

In this study, Cathodoluminescense (CL), Photoluminenscence (PL), Field emission scanning electron microscope (FE-SEM), Energy dispersive spectrometer (EDS) and X-Ray diffractometer (XRD) analyzed the

会议

phosphorcombinatorial ink-jet printingcathodoluminescenseEMAoptical properti

Preparation of Low Polarity Acrylates and the Application of Low-K Films

Three difunctional low polarity acrylate monomers were synthesized in this study.After purification, the obtained acrylates were then mixed with a co-monomer tricyclodecane dimethanol diacrylate(TDDA)

会议

UV curingacrylatePOSSlow dielectric constants

The Mechanical Behavior and Thermal Properties of CNT/CFRP Laminate Composites for Wind Blade Compos

The synergetic effect of Multi-walled carbon nanotube (MWCNT), and carbon fiber (CF) on the static mechanical, and thermal properties of MWCNT/epoxy (EP), and carbon fiber reinforced polymer (CFRP) co

会议

Carbon nanotubesThe coefficient of thermal expansionCarbon fiberEpoxy

Physical and Mechanical Properties of Polymer Eco-Nanocomposites

When compared to their synthetic counterparts, natural fibres represent an environmentally friendly alternative by virtue of several attractive attributes that include lower density, lower cost, non-t

会议

cellulose fibresnanocompositehalloysite nanotubeswater absorptionflammabilit

Cotton Fabrics Reinforced PLA Composite Materials

Cotton plain fabrics have been used to reinforce polylactic acid (PLA) resin to make a green composite.The PLA has been modified with PPgMA to improve the interface properties between cotton and the P

会议

cottonPLAanti-agingcompositexenon

Effect of Molding Conditions on Shear Strength of Laminated Bamboo Composites

This paper deals with the mechanical properties of laminated bamboo composites fabricated from steam-exploded bamboo by a hot-pressing method.The adhesion strength of the laminated bamboo composites w

会议

bamboosteam-explosionlaminatemolding conditionshear strength

Numerical Prediction of Mechanical Properties for Polylactide/Cotton Woven Fabric Composite

The non-biodegradability of plastics has caused extensive environmental problems associated with their disposal.Among commercially available biodegradable plastics, recent research has focused on the

会议

CompositeWoven FabricPolylactic AcidPrediction ModelSlice Array Model

Bending of 3-D Natural Fiber Fabric Reinforced Composites

其他学术论文