Cotton Fabrics Reinforced PLA Composite Materials

来源 :第七届亚澳复合材料会议 | 被引量 : 0次 | 上传用户:marinehope
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Cotton plain fabrics have been used to reinforce polylactic acid (PLA) resin to make a green composite.The PLA has been modified with PPgMA to improve the interface properties between cotton and the PLA.Various contents (2%, 4%, 6%, 8%, 10% and 12%)of PPgMA were added into the PLA to improve the adhesion and toughness of the PLA.A Xenon weather meter was used to inspect the anti-aging characteristics of the modified PLA.Furthermore, the degradation of the modified PLA is discussed in this paper.
其他文献
The comprehensive perfermance of three kinds of surface preparation systems of polyurea coatings for Beijing-Shanghai High-Speed Railway bridge concrete beams protection both in situ and in lab were s
Syntactic foams are hollow particle filled composites, and have many useful characteristics, i.e.low density, high stiffness compared to normal foams and low thermal and electrical conductivity.It is
Dispersions of few-layer graphene nanosheets (FLGs) in ethanol were prepared for the first time utilizing ultrasonic-treatment of HNO3 modified-expanded graphite in ammonia-ethanol solution.This treat
In this study, we investigated different spinning processes to electrical resistance properties of anti-static polyester fiber.We demonstrated that using sheath/core cross-section of bicomponent fiber
In this study, TiON/Polyol composite coatings on PET substrates were prepared as photocatalyst layers in thin film reactor for the photodecolouration of methyl blue (MB) under visible light irradiatio
The synergetic effect of Multi-walled carbon nanotube (MWCNT), and glass fiber (GF) on the static and dynamic mechanical, and thermal properties of MWCNT/ epoxy (EP), glass fiber reinforced polymer (G
In this study, Cathodoluminescense (CL), Photoluminenscence (PL), Field emission scanning electron microscope (FE-SEM), Energy dispersive spectrometer (EDS) and X-Ray diffractometer (XRD) analyzed the
Three difunctional low polarity acrylate monomers were synthesized in this study.After purification, the obtained acrylates were then mixed with a co-monomer tricyclodecane dimethanol diacrylate(TDDA)
The synergetic effect of Multi-walled carbon nanotube (MWCNT), and carbon fiber (CF) on the static mechanical, and thermal properties of MWCNT/epoxy (EP), and carbon fiber reinforced polymer (CFRP) co
When compared to their synthetic counterparts, natural fibres represent an environmentally friendly alternative by virtue of several attractive attributes that include lower density, lower cost, non-t