Study of intermetallic particles of Al-Si-Mg-Zr-Hf alloys formed during solidification and solution

来源 :15th International Conference on Aluminium Alloys(ICAA15)(第十 | 被引量 : 0次 | 上传用户:zzz999z
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Because of lightweight and good mechanical properties, aluminum-silicon casting alloys, especially Al-Si-Mg, are mainly applied as automotive engine components for the weight reduction demand.In this work, four alloys with the compositions of Al-7Si-0.3Mg,Al-7Si-0.3Mg-0.5Hf, Al-7Si-0.3Mg-0.15Zr and Al-7Si-0.3Mg-0.5Hf-0.15Zr had been cast and subsequently heat treated at the temperature 560℃ for 20 hours.
其他文献
Effect of Zn and Cu additions on the single-step and two-step aging processes of 5xxx series Al alloy have been systematically investigated.For the newly developed alloys, the Mg-Cu clusters are respo
会议
The duplex nucleation for primary Si in Al-Si alloy has been studied by crystallographic analysis and experiment verification.The edge-to-edge matching model was used for crystallographic investigatio
会议
At present, the age-hardening responses still needs to be further improved to meet gradually increased requirements.In this work, the effect of 3.0wt% Zn on the precipitation behaviors of Al-Mg-Si-Cu
会议
In this paper, effect of precipitation of ScAl3 phase during solutionizing and ageing on microhardness and electric conductivity of Al-0.2wt% Sc and alloy was investigated by TEM microstructure observ
会议
Al-Zn-Mg-Cu alloys are widely used for aircraft applications because of their superior mechanical properties and strength/weight ratios.Commercial Al-Zn-Mg-Cu alloys without lithium or scandium have b
会议
Aluminum alloys with both high electrical conductivity and high strength are being paid more and more attentions for their promising applications in electrical conductors (such as overhead power lines
会议
Structure and hardness of 2024 type aluminum alloy were analyzed in order to find out the effects of volume fraction, size and distribution of dispersoids (aluminides of transition metals) and main st
会议
Al-Li alloy is considered to be an ideal structural material for aerospace vehicles because of its fight weight, high strength and other excellent qualities.However, the low welding performance of Al-
会议
Fe element is well known as a common impurity in Al-Si alloy.Fe intermetallic compounds are formed and cause negative effect for mechanical property such as ductility.Fe intermetallic compounds were f
会议
The evolution of texture in AA6016 alloy during processing was systematically investigated.The hot-rolled 6016 plates were cold-rolled to 0.9 mm through three different rolling processes.One was direc
会议