【摘 要】
：
In anion exchange membrane (AEM) fuel cells (AEMFCs), AEM acts as an anion conductor for transporting hydroxide ions and prevents fuel crossover between ano
【机 构】
：
Key Laboratory of Applied Surface and Colloid Chemistry (MOE),School of Materials Science and Engine
【出 处】
：
第二届中国国际复合材料科技大会 (CCCM-2)
论文部分内容阅读
In anion exchange membrane (AEM) fuel cells (AEMFCs), AEM acts as an anion conductor for transporting hydroxide ions and prevents fuel crossover between anode and cathode.For AEMFCs applications, AEMs require high hydroxide conductivity, low swelling degree, and high chemical stability [1,2].Generally, high hydroxide conductivity can be obtained via increasing the ion exchange capacity (IEC) of the membrane to some extent.
其他文献
Using the plasmonic metasurface, we have deigned and purposed a high efficient solar ray absorber by tailoring the thickness of the metallic arrays.The geom
Composites' properties are anisotropic and stochastic in nature.The full characterization usually needs a large number of tests and specimens, which is time
For these recent years, piezoelectric energy harvesting has been a very popular research topic.Piezoelectric materials are used to harvest wasted mechanical
Self-passivated aluminum flakes (AFs) were incorporated into polyvinylidene fluoride (PVDF) matrix with oriented structure to form the 2-3-type AFs/PVDF com
Amorphous microwires have attracted growing interest in recent years due to their outstanding soft magnetic properties.The giant-magnetoimpedance (GMI) is t
The metal substrate has been widely used in common LED packaging filed due to their high thermal conductivity.However, because metal materials have a high t
Interlaminar delamination is a common failure mode which is critical to the integrity and reliability of laminated fibre composite structures for aerospace,
The objective of the present work is to determine the influence of the neutral salt spray corrosion on the wear resistance of HVOF sprayed NiCr-Cr3C2 coatin
Structural battery is the battery that contributes to the structure with a single lightweight material entity.In this paper, the components of the structura
In this work, paraffin-mullite fiber composites were prepared by melt infiltration process, particularly, to be embedded within the endotherms, ZrOCl2·8H2O