Autoclave manufacturing process simulation of composite materials

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户：wukuiyuxing

【摘要】

：

　　With the incremental percentage of use of composite materials in civil aircraft, arising with the urgent need of configuration accuracy, simulation method i

【作者】

：

JiaLijie[1]WeiRan[1]LaurentDufort[2]LiuWeiping[1]XuPeng[1]YanDongxiu[1]

【机构】

：

Shanghai Aircraft Manufacturing Co.,Ltd,Institute of Aeronautical Manufacturing Technology,Shanghai

【出处】

：

第二届中国国际复合材料科技大会 (CCCM-2)

【发表日期】

：

2015年期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　With the incremental percentage of use of composite materials in civil aircraft, arising with the urgent need of configuration accuracy, simulation method is presenting itself a crucial role to component shape controlling and process optimization.The whole curing process including autoclave flow field and process-induced deformation (PID)of components were studied with simulation method, focusing on the influential factors, algorithm construction.

其他文献

Research on hot-press bonded mechanism and designing for Prepreg

　　According to the requirement of high efficiency and high reliability for prepregchange in Automatic Placement and Tape Winding, the theology theory and the

会议

Modeling of Cutting Forces in Turning of Al/SiC composites

　　Changing of cutting force has an important effect on metal cutting process in cutting aluminum-based SiC particle reinforced metal matrix composite(MMCs).An

会议

The Optimization of Composite Material Winding Strategy Based on Robot

　　The industrial robot with the characteristic of multi degree of freedom, good flexibility, high repeated accuracy and strong expansibility, is widely used i

会议

Design and Applicationof the Wireless Transmission Tension Test-controlled System based on PLC

　　The wireless transmission tension test-controlled system automatic controlled by PLC has been introduced according to the winding tension of the vertical wi

会议

The study on Automated Fiber Placement system for thermoplastic composite

　　The fiber reinforced thermoplastic composite has broad prospects in aerospace field due to its advantages of high specific strength, high specific modulus,

会议

Analysis of design temperature for autoclave

　　Analyzing the influence of the design temperature for autoclave.In order to obtain the temperature distribution of main pressure part for autoclave,building

会议

Numerical simulation study of the curing process of large thickness composite

　　Numerical simulation method was used to study the curing process of considerable thickness X850 toughened epoxy resin laminate.The affection of heating to t

会议

Weighting analysis of factors of spring-back for C-shaped composite spars

　　Affect factors of spring-back for C-shaped composite spars generally include geometry, shear effect between plies, and mold, et al.The factors often bring t

会议

Interfacial property of shape memory alloy reinforced composite under uniaxial pull-out loading

　　Shape memory alloy reinforced composite has functional and load-bearing duplex capacities, thus it has a bright future in aerospace and transit field.To cla

会议

Research of different process parameters that effect the quality of Automatic Tape Laying

　　Along with the flourish development of civil aviation in domestic, ATL technique gets more and more widely application.The wing surface structures such as t

会议

Autoclave manufacturing process simulation of composite materials

其他学术论文