【摘 要】
：
Magnesium is characterized by its excellent castability,mechinability,bio-compatibility,high thermal conductivity,high dimensional stability,and is easily recycled with low energy consumption.With a d
【机 构】
：
School of Materials Science and Engineering,Chongqing Institute of Technology,Chongqing,China 400050
【出 处】
：
Fifth International Conference on Surface Engineering(第五届表面工
论文部分内容阅读
Magnesium is characterized by its excellent castability,mechinability,bio-compatibility,high thermal conductivity,high dimensional stability,and is easily recycled with low energy consumption.With a density of 1.75 g/cm3 magnesium is the lightest structural metal.The above characteristics make it the best choice in a number of demanding applications including automobile,aerospace,computer,mobile phones components,household equipment,etc.However,poor corrosion and wear resistance is the critical issues limiting further application of these alloys.In the present study,an attempt was made to enhance corrosion resistance and microhardness of a commercial Mg alloy AZ91D by electron beam alloying.Flame spray method was used to prepare Al coating on the suface of AZ91D magnesium alloy,then remelted by high power electron beam.The microstructure and composition of the coating were analyzed in detail by scanning electronic microscope (SEM) and energy dispersive spectros (EDS).
其他文献
The present paper concentrates on structure and micro-mechanical properties in the helium-implanted layer on titanium treated by plasma-based ion implantation with a voltage of-30 kV and a dose range
The novel iron-based medium manganese alloy coatings were prepared on 18Cr2Ni4WA steel surface by laser cladding with a continuous wave 5 kW CO2 laser and powder simultaneous feeding system.Microstruc
Fabrication of an advanced ceramic coating on carbon steel has been extensively used to improve the performances of the substrate.However,owing to the different thermal expansion coefficient between c
Porosity and rough surface of EB-PVD (Electron Beam-Physical Vapor Deposition) deposited ZrO2-7%Y2O3 coatings with the thickness of 150 μm on heat-resistant steel have been characterized using the ult
This paper presents a review of Ti-Si-N-based nanocomposite films but the emphasis will be on the discussion of a novel Ti-Si-C-N system aiming at practical applications.Thin (1000 ℃) and excellent to
In this paper,nanosized alumina,titania and other additive powders were blended and reconstituted to sprayable feedstock.The nanostructured Al2O3-13wt%TiO2 ceramic coatings have been successfully prep
In general,the running behaviors and damages of fretting wear can be revealed by two fretting maps,i.e.Running Condition Fretting Map (RCFM) and Material Responding Fretting Map (MRFM).In this paper,f
Multi-sensing methodology has been realized on the Nano & Micro surface mechanics testing which can perform all common mechanical tests of nano/micro indentation,scratching,reciprocating and rotating
Due to high grain boundary density,nanocrystalline(NC) functional coatings exhibited unusual mechanical,physical and chemical properites.The tribological and corroison performance is very important to
The microarc oxidation (MAO) films on magnesium alloy AZ31 were modified by high-intensity2 pulsed ion beam (HIPIB) irradiation at ion current density of 200-350 A/cm2 with 1-10 shots.SEM observation