The influence of substrate-target orientation on the properties of ZrN films deposited by arc ion pl

来源 :第四届国际表面与界面科学与工程学术会议(The Fourth International Conference on S | 被引量 : 0次 | 上传用户:jttzw
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The crystallograpic structure and properties of Zirconium nitride (ZrN) films deposited on 304 stainless steel were investigated for substrates oriented parallel with and perpendicular to the Zirconium target.The ZrN films prepared with a parallel substrate were found to exhibit {311 } orientations.For perpendicular substrates,ZrN films exhibited strong {220} orientation.SEM results showed that the parallel ZrN films have muM-shaped droplets,and perpendicular orientation ZrN films have oval-shaped droplets.The thickness of ZrN films in parallel mode is 1/2 of that in perpendicular mode.Nanoinden-tation results showed the hardness of ZrN films in perpendicular mode is lower than that of parallel mode.Potentiodynamic scanning results showed the corrosion resistance of films in perpendicular mode is better than that of films in parallel mode.
其他文献
A manganese dioxide (MnO2) coating was electrically deposited on carbon nanotubes (CNTs),prepared by floating-catalyst chemical vapor deposition,from magnesium sulfate (MnSO4) aqueous solution.The mic
Inductively coupled plasma (ICP) system with the adjustable distance (d) between the inductance coil and substrates was designed to effectively utilize the spatial confinement of ICP discharge,and the
TiO2 films were fabricated on Si substrate by using electron-beam gun evaporation.Influence of deposition rate,deposition temperature and ion beam bombarding on stress in TiOh films was studied by AFM
会议
Owing to the advantages of even surface,low cost and simple operation,electroless plating is applied to prepare Ni-Co-P/Si3N4 composite coating on a hyper-eutectic Al-Si casting alloy in this paper.Th
Negative thermal expansion ZrW2O8 thin films have been grown on quartz substrates by pulsed laser deposition (PLD) method using ZrW2O8 ceramic target and annealing subsequently.The influences of annea
ZrB2、AlN coatings and ZrB2/AlN multilayered coatings have been synthesized by ultra-high vacuum IBAD at room temperature.Scanning electron microscopy,X-ray diffraction,XP-2 profiler and Nano indenter
The aim of the present research was to investigate the influence of substrate roughness on structure and mechanical properties of Titanium Aluminium Nitride (TiAlN) coatings.Tungsten Carbide rectangul
TiO2 powders have been successfully synthesized using TiCl4 and air as precursors by atmospheric pressure plasma jet (APPJ),which was powered by a near-square wave high voltage (H.V.) of 8 kV and a fr
CrN thick comings were deposited on silicon (111) by middle-frequency magnetron sputtering system under various parameters.The microstructure was analyzed by X-ray diffraction (XRD),scanning electron