论文部分内容阅读
汽车蓄电池的国际公认测定方法,主要是根据被检测蓄电池的温度、电压及放电时的电流3项技术标准来进行的。美国汽车工程师学会为蓄电池的测定设立了两种标准:储备能量及冷起动安培数的测定。由于这两种技术标淮都被国际蓄电池学会采用,所以又叫做国际蓄电池学会标准(简称 BCI)。而在日本和欧洲,有时又以不同于国际蓄电池学会的储备能量和起动安培数的方法来测定蓄电池。以下简要介绍一下几种主要的国际公认蓄
The internationally accepted test methods for automobile batteries are mainly based on the three technical standards of the tested battery temperature, voltage and current at the time of discharge. The American Society of Automotive Engineers has established two standards for the determination of batteries: reserve energy and cold-start amperage determination. As these two technical standards are adopted by the International Battery Society, it is also called the International Battery Society standard (referred to as BCI). In Japan and Europe, batteries are sometimes measured in a way that is different from the reserve energy and starting amperage of the International Battery Society. The following is a brief overview of several major internationally recognized savings