【摘 要】
：
The motion of droplets on a super-hydrophobic surface, whether by sliding or rolling, is a hot research topic. It affects the performance of super-hydrophobic materials in many industrial applications. In this study, a super-hydrophobic surface with a var
【机 构】
：
Key Laboratory of Marine Materials and Related Technologies,Zhejiang Key Laboratory of Marine Materi
论文部分内容阅读
The motion of droplets on a super-hydrophobic surface, whether by sliding or rolling, is a hot research topic. It affects the performance of super-hydrophobic materials in many industrial applications. In this study, a super-hydrophobic surface with a varied roughness is prepared by chemical-etching. The adhesive force of the advancing and receding contact angles for a droplet on a super-hydrophobic surface is characterized. The adhesive force increases with a decreased contact angle, and the minimum value is 0.0169 mN when the contact angle is 151.47°. At the same time, the motion of a droplet on the super- hydrophobic surface is investigated by using a high-speed camera and fluid software. The results show that the droplet rolls instead of sliding and the angular acceleration increases with an increased contact angle. The maximum value of the angular acceleration is 1,203.19 rad/s2 and this occurs when the contact angle is 151.47°. The relationship between the etching time, roughness, angular acceleration, and the adhesion force of the forward and backward contact angle are discussed.
其他文献
The layered double hydroxide (LDH) is a kind of natural mineral, which can also be manually prepared. It has been practically applied in various fields due to its unique crystal structure and diversity of composition, size, and morphology. In this work, L
As a widely used engineering polymer, epoxy resin has been successfully employed in high-performance components and setups. However, the poor thermal and friction properties of traditional epoxy resin greatly limit its application in many extreme environm
In the present work, two types of novel nano additives, titanium sulfonate ligand/black phosphorus (TiL4/BP) and titanium dioxide/black phosphorus (TiO2/BP) nanocomposites, were prepared. The tribological behavior of the steel/steel friction pairs lubrica
In this study, the nanocomposites of MoS2 nanoparticles (NPs) grown on carbon nanotubes (MoS2@CNT), graphene (MoS2@Gr), and fullerene C60 (MoS2@C60) were synthesized, characterized, and evaluated for potential use as lubricant additives. By using the bene
Herein, a series of Ag coatings with different micro-dimples were fabricated on copper surfaces by laser surface texturing (LST) and magnetron sputtering. Multilayer graphene lubricating grease (MGLG) was prepared using multilayer graphene as an additive.
为了提升思想政治工作水平,文章首先阐述了高职院校开展朋辈教育的意义,然后论述了高职院校“3+3+1”朋辈教育体系的构建,包括朋辈讲师体系构建、教育内容体系构建、朋辈教育循环构建三个方面.
TiN–Ag composite coatings were prepared by pulsed bias arc ion plating. X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS) were applied to analyze the compositions of the coatings. Tribological properties of the coatings were studied u
The mechanism of adhesive friction between viscoelastic materials is a key question. In this study, the friction process of the adhesive interface between a friction lining and a wire rope is dynamically observed in real time to analyze the adhesion hyste
The lubrication effectiveness of MoS2 nanoparticles as an oil additive remains unclear, restricting its application in industry to reduce friction. The goal of this work was to explore the lubrication mechanism of MoS2 nanoparticles as an oil additive. In
The development of a high-performance solid-lubricating composite with excellent self-lubricity over a broad temperature range in vacuum is significant to solve the frictional problems of spatial mechanisms. In this study, the vacuum tribological behavior