论文部分内容阅读
目前大容量注射液所用的容器共有兩种形式,一种是小口玻璃瓶,用橡皮塞塞口,鋁皮盖軋封;一种是兩头尖玻璃安瓿,熔融封口;前者在近几年内已为各生产單位广泛採用,过去几乎是很少看到,后者在注射液生产上具有相当長的历史,缺点是难于洗滌,所得制品廢品率高,質量很坏,故現已少用,甚或不用。但是用这种形式的玻璃安瓿来作大容量注射液的容器,現阶段还有它一定的价值,理由是:1.瓶裝大容量注射液,在交通方便地区,由于空瓶能够及时收回,不但节約物資,同时
At present, there are two types of containers for large-volume injection, one is a small-mouth glass bottle, a rubber stopper plug mouth and an aluminum skin cover are rolled and sealed; the other is a sharp glass ampule with two ends fused and sealed; It has been widely used by various production units. In the past, it was seldom seen. The latter had a long history of injection production. The disadvantage was that it was difficult to wash and the resulting product had a high rejection rate and poor quality. No need to. But with this form of glass ampoules for large-capacity injection of the container, at this stage there is still some value for the following reasons: 1. Bottled bulk injection, convenient traffic area, due to the empty bottle can be recovered in time, not only Save material at the same time