论文部分内容阅读
该炉衬材料是机械工业部机械科学研究院下达的重点科研项目之一,由湖北省机械研究所等单位共同研制成功。经有关专家、教授鉴定,认为此种炉衬材料达到了如下技术性能。在出铁槽平均出炉温度大于1450℃时,可连续熔化20小时以上而保持炉况正常。炉衬平均腐蚀速度在4～6mm/h。因此该种炉衬材料具有抗蚀能力强,腐蚀速度小,耐火材料耗量低,渣量小等优点。就延长炉龄,提高炉衬寿命方面达到了国内先进水平。此种炉衬材料,来源丰富、成本低廉、实用性强、具有普遍推广价值。欢迎各厂家用户来
The lining material is one of the key scientific research projects issued by the Mechanical Science Research Institute of the Ministry of Machinery Industry and was jointly developed by Hubei Machinery Research Institute and other units. The experts, professors identified that such lining material has reached the following technical performance. When the average tapping temperature of the tundish is more than 1450 ℃, it can be continuously melted for more than 20 hours to keep the furnace condition normal. Lining average corrosion rate of 4 ~ 6mm / h. Therefore, this type of lining material has the advantages of strong corrosion resistance, low corrosion rate, low refractories consumption and small amount of slag. To extend the furnace age, improve lining life reached the advanced level in the country. This lining material, rich in source, low cost, practicality, with general promotion value. Welcome to the factory users