“X”型多用限位工具

• 作 者: 金汉荣
• 出 处: 工具技术
• 发表日期: 1986年07期
• 关键词: 沉孔 停车位置 辅助时间 螺钉 车床 钻床 尺寸 限位器 中所 这种

利用废料制成图示的“X”型多用限位工具,每个分支加工成不同的厚度,厚度大小常与埋头螺钉的沉孔深度相当(1/4.5/16.3/8和1/2时).这样,既节省了材料,又节约了限位过程中所耗费的大量辅助时间. 这种限位器用于钻床或车床调整,其停车位置,能很方便地达到近似尺寸,不需要经过多次试钻便能得到正确的沉孔深度.

The “X” type multi-use stop tool, shown in the figure, is made of scrap, each of which is made to a different thickness and is often of a comparable thickness to the counterbore depth of countersunk screws (1 / 4.5 / 16.3 / 8 and 1/2) This saves material and saves a great deal of time spent during the stop, which is used for drilling or lathe adjustment and is conveniently parked to an approximate size without having to go through multiple passes Test drilling can get the correct sink hole depth.